Re: [PATCH 2/3] arm64: dts: qcom: ipq5332: enable the download mode support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Jan 30, 2023 at 10:31:54PM +0530, Kathiravan T wrote:
> Enable the support for download mode to collect the RAM dumps if
> system crashes, to perform the post mortem analysis.
> 
> Signed-off-by: Kathiravan T <quic_kathirav@xxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/ipq5332.dtsi | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
> index 7f0ba2ec339c..6a1d0cc927ef 100644
> --- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
> @@ -70,6 +70,7 @@
>  	firmware {
>  		scm {
>  			compatible = "qcom,scm-ipq5332", "qcom,scm";
> +			qcom,dload-mode = <&tcsr 0x0>;
>  		};
>  	};
>  
> @@ -142,6 +143,11 @@
>  				 <0>;
>  		};
>  
> +		tcsr: syscon@193d100 {
> +			compatible = "qcom,tcsr-ipq5332", "syscon";
> +			reg = <0x0193d100 0x4>;

Please map the entire TCSR_REGS here, and use qcom,dload-mode to encode
the offset within this.

Thanks,
Bjorn

> +		};
> +
>  		sdhc: mmc@7804000 {
>  			compatible = "qcom,ipq5332-sdhci", "qcom,sdhci-msm-v5";
>  			reg = <0x07804000 0x1000>, <0x07805000 0x1000>;
> -- 
> 2.17.1
> 



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux