On 8.02.2023 01:36, Douglas Anderson wrote:
> This is the equivalent of commit f5b4811e8758 ("arm64: dts: qcom:
> sc7180: Add trogdor eDP/touchscreen regulator off-on-time") and commit
> 23ff866987de ("arm64: dts: qcom: sc7180: Start the trogdor
> eDP/touchscreen regulator on"), but for herobrine instead of trogdor.
>
> The motivations for herobrine are the same as for trogdor.
>
> NOTES:
> * Currently for herobrine all boards are eDP, not MIPI. If/when we
> have herobrine derivatives that are MIPI they we can evaluate
> whether the same off-on-delay makes sense for them. For trogdor we
> didn't add the delay to MIPI panels because the problem was found
> late and nobody had complained about it. For herobrine defaulting to
> assuming the same 500ms makes sense and if we find we need to
> optimize later we can.
> * Currently there are no oddball herobrine boards like homestar where
> the panel really likes to be power cycled. If we have an oddball
> board it will need to split the eDP and touchscreen rail anyway
> (like homestar did) and we'll have to delete the "regulator-boot-on"
> from that board.
>
> Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Konrad
> This patch should be applied atop my recent series adjusting the
> herobrine touchscreen rails [1]. If I need to send a v2 of that series
> I will add this at the end of it as patch #8.
>
> [1] https://lore.kernel.org/all/20230207024816.525938-1-dianders@xxxxxxxxxxxx/
>
> arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
> index ded36b5d28c7..312cc0e1cbc7 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
> @@ -110,6 +110,22 @@ pp3300_left_in_mlb: pp3300-left-in-mlb-regulator {
>
> regulator-enable-ramp-delay = <3000>;
>
> + /*
> + * eDP panel specs nearly always have a spec that says you
> + * shouldn't turn them off an on again without waiting 500ms.
> + * Add this as a board constraint since this rail is shared
> + * between the panel and touchscreen.
> + */
> + off-on-delay-us = <500000>;
> +
> + /*
> + * Stat the regulator on. This has the advantage of starting
> + * the slow process of powering the panel on as soon as we
> + * probe the regulator. It also avoids tripping the
> + * off-on-delay immediately on every bootup.
> + */
> + regulator-boot-on;
> +
> vin-supply = <&pp3300_z1>;
> };
>
