[PATCH V2] clk: qcom: ipq5332: mark GPLL4 as critical temporarily

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Clock framework disables the GPLL4 source since there are no active users
for this source currently. Some of the clocks initialized by the
bootloaders uses the GPLL4 as the source. Due to this, when the GPLL4 is
disabled by the clock framework, system is going for the reboot.

To avoid this, mark the GPLL4 as CRITICAL so that clock framework
doesn't disable it. Once the users of this source is enabled, we can get
rid of this flag.

Signed-off-by: Kathiravan T <quic_kathirav@xxxxxxxxxxx>
---
Changes in V2:
	- Added a comment in driver explaining the need of the flag

 drivers/clk/qcom/gcc-ipq5332.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/clk/qcom/gcc-ipq5332.c b/drivers/clk/qcom/gcc-ipq5332.c
index c8a5fa1bafca..2e043d2d0598 100644
--- a/drivers/clk/qcom/gcc-ipq5332.c
+++ b/drivers/clk/qcom/gcc-ipq5332.c
@@ -127,6 +127,16 @@ static struct clk_alpha_pll gpll4_main = {
 			.parent_data = &gcc_parent_data_xo,
 			.num_parents = 1,
 			.ops = &clk_alpha_pll_stromer_ops,
+			/*
+			 * There are no consumers for this GPLL in kernel yet,
+			 * (will be added soon), so the clock framework
+			 * disables this source. But some of the clocks
+			 * initialized by boot loaders uses this source. So we
+			 * need to keep this clock ON. Add the CRITICAL flag
+			 * so the clock will not be disabled. Once the consumer
+			 * in kernel is added, we can get rid off this flag.
+			 */
+			.flags = CLK_IS_CRITICAL,
 		},
 	},
 };
-- 
2.17.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux