The new SM8550 SoC bumps up the HW version of QMP phy to v6.20 for PCIE g4x2. Add the new PCS offsets in a dedicated header file. Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> --- This patchset relies on the following patchset: https://lore.kernel.org/all/20230117224148.1914627-1-abel.vesa@xxxxxxxxxx/ The v6 of this patch is: https://lore.kernel.org/all/20230202123902.3831491-4-abel.vesa@xxxxxxxxxx/ Changes since v6: * none Changes since v5: * none Changes since v4: * none Changes since v3: * added Dmitry's R-b tag Changes since v2: * none Changes since v1: * split all the offsets into separate patches, like Vinod suggested drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6_20.h | 18 ++++++++++++++++++ drivers/phy/qualcomm/phy-qcom-qmp.h | 2 ++ 2 files changed, 20 insertions(+) create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6_20.h diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6_20.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6_20.h new file mode 100644 index 000000000000..9c3f1e4950e6 --- /dev/null +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6_20.h @@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2023, Linaro Limited + */ + +#ifndef QCOM_PHY_QMP_PCS_V6_20_H_ +#define QCOM_PHY_QMP_PCS_V6_20_H_ + +/* Only for QMP V6_20 PHY - USB/PCIe PCS registers */ +#define QPHY_V6_20_PCS_G3S2_PRE_GAIN 0x178 +#define QPHY_V6_20_PCS_RX_SIGDET_LVL 0x190 +#define QPHY_V6_20_PCS_COM_ELECIDLE_DLY_SEL 0x1b8 +#define QPHY_V6_20_PCS_TX_RX_CONFIG1 0x1dc +#define QPHY_V6_20_PCS_TX_RX_CONFIG2 0x1e0 +#define QPHY_V6_20_PCS_EQ_CONFIG4 0x1f8 +#define QPHY_V6_20_PCS_EQ_CONFIG5 0x1fc + +#endif diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h index 80e3b5c860b6..760de4c76e5b 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp.h @@ -40,6 +40,8 @@ #include "phy-qcom-qmp-pcs-v6.h" +#include "phy-qcom-qmp-pcs-v6_20.h" + /* Only for QMP V3 & V4 PHY - DP COM registers */ #define QPHY_V3_DP_COM_PHY_MODE_CTRL 0x00 #define QPHY_V3_DP_COM_SW_RESET 0x04 -- 2.34.1
