[RFC v3 3/7] dt-bindings: phy: qcom,snps-eusb2-repeater: Add phy related properties

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The phy properties are used for allowing the eusb2 to interface
with the repeater, which is modelled as a phy driver. Add the phys
and phy-names properties.

Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
---
 .../devicetree/bindings/phy/qcom,snps-eusb2-phy.yaml     | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-phy.yaml
index de72577e34a4..8efb09b2dc5c 100644
--- a/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-phy.yaml
@@ -33,6 +33,15 @@ properties:
   resets:
     maxItems: 1
 
+  phys:
+    maxItems: 1
+    description:
+      Phandle to eUSB2 to USB 2.0 repeater
+
+  phy-names:
+    items:
+      - const: eusb2-repeater
+
   vdd-supply:
     description:
       Phandle to 0.88V regulator supply to PHY digital circuit.
-- 
2.34.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux