Re: [PATCH V2 8/9] arm64: dts: qcom: add IPQ5332 SoC and MI01.2 board support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 1/30/2023 5:55 PM, Konrad Dybcio wrote:

On 30.01.2023 12:47, Kathiravan Thirumoorthy wrote:
From: Kathiravan T <quic_kathirav@xxxxxxxxxxx>

Add initial device tree support for the Qualcomm IPQ5332 SoC and
MI01.2 board.

Signed-off-by: Kathiravan T <quic_kathirav@xxxxxxxxxxx>
---
[...]

+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		tz_mem: tz@4a600000 {
+			no-map;
+			reg = <0x0 0x4a600000 0x0 0x200000>;
reg should come before no-map


Ack. Will fix it in V3.




+		};
+	};
+
+	soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+
+		tlmm: pinctrl@1000000 {
+			compatible = "qcom,ipq5332-tlmm";
+			reg = <0x01000000 0x300000>;
+			interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 53>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			serial_0_pins: serial0-state {
+				pins = "gpio18", "gpio19";
+				function = "blsp0_uart0";
+				drive-strength = <8>;
+				bias-pull-up;
+			};
+		};
+
+		gcc: clock-controller@1800000 {
+			compatible = "qcom,ipq5332-gcc";
+			reg = <0x01800000 0x80000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clock-names = "xo",
+				      "sleep_clk",
+				      "pcie_2lane_phy_pipe_clk",
+				      "pcie_2lane_phy_pipe_clk_x1",
+				      "usb_pcie_wrapper_pipe_clk";
+			clocks = <&xo_board>,
+				 <&sleep_clk>,
+				 <0>,
+				 <0>,
+				 <0>;
+		};
+
+		sdhc: mmc@7804000 {
+			compatible = "qcom,ipq5332-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x07804000 0x1000>, <0x07805000 0x1000>;
+
+			interrupts = <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "core", "xo";
+			mmc-ddr-1_8v;
+			mmc-hs200-1_8v;
+			max-frequency = <192000000>;
+			bus-width = <4>;
+			status = "disabled";
+		};
+
+		blsp1_uart0: serial@78af000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078af000 0x200>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		intc: interrupt-controller@b000000 {
+			compatible = "qcom,msm-qgic2";
+			reg = <0x0b000000 0x1000>,	/* GICD */
+			      <0x0b002000 0x1000>,	/* GICC */
+			      <0x0b001000 0x1000>,	/* GICH */
+			      <0x0b004000 0x1000>;	/* GICV */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0b00c000 0x3000>;
+
+			v2m0: v2m@0 {
+				compatible = "arm,gic-v2m-frame";
+				reg = <0x00000000 0xffd>;
+				msi-controller;
+			};
+
+			v2m1: v2m@1 {
+				compatible = "arm,gic-v2m-frame";
+				reg = <0x00001000 0xffd>;
The unit address does not match the address part of the reg
property, dtbs_check will not succeed..


Thanks, will update the node name accordingly in V3. AFAIR, I didn't see any dtbs_check warning. Let me cross check it again.



The rest lgtm


Thanks a lot for the review!



Konrad
+				msi-controller;
+			};
+
+			v2m2: v2m@2 {
+				compatible = "arm,gic-v2m-frame";
+				reg = <0x00002000 0xffd>;
+				msi-controller;
+			};
+		};
+
+		timer@b120000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0b120000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			frame@b120000 {
+				reg = <0x0b121000 0x1000>,
+				      <0x0b122000 0x1000>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <0>;
+			};
+
+			frame@b123000 {
+				reg = <0x0b123000 0x1000>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <1>;
+				status = "disabled";
+			};
+
+			frame@b124000 {
+				reg = <0x0b124000 0x1000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <2>;
+				status = "disabled";
+			};
+
+			frame@b125000 {
+				reg = <0x0b125000 0x1000>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <3>;
+				status = "disabled";
+			};
+
+			frame@b126000 {
+				reg = <0x0b126000 0x1000>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <4>;
+				status = "disabled";
+			};
+
+			frame@b127000 {
+				reg = <0x0b127000 0x1000>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <5>;
+				status = "disabled";
+			};
+
+			frame@b128000 {
+				reg = <0x0b128000 0x1000>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <6>;
+				status = "disabled";
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux