Re: [PATCH] mmc: sdhci-msm: Add support for vendor capabilities registers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Mar 19, 2015 at 9:21 AM, Georgi Djakov <georgi.djakov@xxxxxxxxxx> wrote:
[..]
>> Does the 8916 board you have work without bumping the
>> regulator_set_load() (previously regulator_set_optimum_mode())? None
>> of my 8974 boards work reliably without it.
>
> My 8916 board seems to be working fine with this, at least when doing basic tests
> like mounting filesystems and file transfers. I'm not calling any regulator_set_load()
> functions. Is your board a dragonboard or something else? If you are doing any
> specific tests maybe i can try the same on my board?
>

My test setup is Xperia Z1, where I get issues when running with
hs200. On Xperia Z3 i can't even read out the partition table during
boot. I'm not sure what causes the difference to the dragonboard -
perhaps just different memories.

So I have a patch where I hook up the mmc framework with some calls to
regulator_set_load(), but it need some more love before I can send it
out. I postponed it due to the rework of regulator_set_optimum_mode()
that I did.

Regards,
Bjorn
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux