Re: [RFC PATCH v2 09/22] ASoC: qcom: qdsp6: Introduce USB AFE port to q6dsp

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Pierre,

On 1/26/2023 7:38 AM, Pierre-Louis Bossart wrote:


On 1/25/23 21:14, Wesley Cheng wrote:
The QC ADSP is able to support USB playback endpoints, so that the main
application processor can be placed into lower CPU power modes.  This adds
the required AFE port configurations and port start command to start an
audio session.

Specifically, the QC ADSP can support all potential endpoints that are
exposed by the audio data interface.  This includes, feedback endpoints
(both implicit and explicit) as well as the isochronous (data) endpoints.
The size of audio samples sent per USB frame (microframe) will be adjusted
based on information received on the feedback endpoint.

I think you meant "support all potential endpoint types"

It's likely that some USB devices have more endpoints than what the DSP
can handle, no?


True, as we discussed before, we only handle the endpoints for the audio interface. Other endpoints, such as HID, or control is still handled by the main processor.

And that brings me back to the question: what is a port and the
relationship between port/backend/endpoints?

Sorry for being picky on terminology, but if I learned something in days
in standardization it's that there shouldn't be any ambiguity on
concepts, otherwise everyone is lost at some point.


No worries, I can understand where you're coming from :). After re-reading some of the notations used, I can see where people may be confused.


  static struct afe_port_map port_maps[AFE_PORT_MAX] = {
+	[USB_RX] = { AFE_PORT_ID_USB_RX, USB_RX, 1, 1},
  	[HDMI_RX] = { AFE_PORT_ID_MULTICHAN_HDMI_RX, HDMI_RX, 1, 1},
  	[SLIMBUS_0_RX] = { AFE_PORT_ID_SLIMBUS_MULTI_CHAN_0_RX,
  				SLIMBUS_0_RX, 1, 1},

And if I look here a port seems to be a very specific AFE concept
related to interface type? Do we even need to refer to a port in the USB
parts?


Well, this is a design specific to how the Q6 AFE is implemented. There is a concept for an AFE port to be opened. However, as mentioned earlier, the "port" term used in soc-usb should be more for how many USB devices can be supported.

If there was a case the audio DSP would support more than one USB device, I believe another AFE port would need to be added.

Thanks
Wesley Cheng



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux