Re: [PATCH] ARM: dts: qcom: msm8974: correct qfprom node reg

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 30.01.2023 19:36, Luca Weiss wrote:
> On Montag, 30. Jänner 2023 19:30:04 CET Konrad Dybcio wrote:
>> On 30.01.2023 19:20, luca@xxxxxxxxx wrote:
>>> From: Craig Tatlor <ctatlor97@xxxxxxxxx>
>>>
>>> The qfprom actually starts at 0xfc4b8000 instead of 0xfc4bc000 as
>>> defined previously. Adjust the tsens offsets accordingly.
>>>
>>> [luca@xxxxxxxxx: extract to standalone patch]
>>>
>>> Fixes: c59ffb519357 ("arm: dts: msm8974: Add thermal zones, tsens and
>>> qfprom nodes") Signed-off-by: Craig Tatlor <ctatlor97@xxxxxxxxx>
>>> Signed-off-by: Luca Weiss <luca@xxxxxxxxx>
>>> ---
>>
>> Isn't this a raw vs ecc-corrected values problem?
> 
> Not quite sure what you mean.
The QFPROM is split into two parts: one where raw values
are stored, and the other one where ECC-corrected copies
of them reside. Usually it's at offset of 0x4000. We should
generally be using the ECC-corrected ones, because.. well..
they are ECC-corrected.. You may want to check if the
fuse you're adding reads the same value at +0x4000.

Konrad
> 
> The original intention behind this patch is to allow to use the pvs fuse at 
> (now) 0xb0 which was inaccessible with the former definition.
> 
>     pvs: pvs@b0 {
>         reg = <0xb0 0x8>;
>     };
> 
> Regards
> Luca
> 
>>
>> Konrad
>>
>>>  arch/arm/boot/dts/qcom-msm8974.dtsi | 12 ++++++------
>>>  1 file changed, 6 insertions(+), 6 deletions(-)
>>>
>>> diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi
>>> b/arch/arm/boot/dts/qcom-msm8974.dtsi index 8d216a3c0851..922d235c6065
>>> 100644
>>> --- a/arch/arm/boot/dts/qcom-msm8974.dtsi
>>> +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
>>> @@ -1132,16 +1132,16 @@ restart@fc4ab000 {
>>>
>>>  			reg = <0xfc4ab000 0x4>;
>>>  		
>>>  		};
>>>
>>> -		qfprom: qfprom@fc4bc000 {
>>> +		qfprom: qfprom@fc4b8000 {
>>>
>>>  			compatible = "qcom,msm8974-qfprom", 
> "qcom,qfprom";
>>>
>>> -			reg = <0xfc4bc000 0x1000>;
>>> +			reg = <0xfc4b8000 0x7000>;
>>>
>>>  			#address-cells = <1>;
>>>  			#size-cells = <1>;
>>>
>>> -			tsens_calib: calib@d0 {
>>> -				reg = <0xd0 0x18>;
>>> +			tsens_calib: calib@40d0 {
>>> +				reg = <0x40d0 0x18>;
>>>
>>>  			};
>>>
>>> -			tsens_backup: backup@440 {
>>> -				reg = <0x440 0x10>;
>>> +			tsens_backup: backup@4440 {
>>> +				reg = <0x4440 0x10>;
>>>
>>>  			};
>>>  		
>>>  		};
>>>
>>> ---
>>> base-commit: 6d796c50f84ca79f1722bb131799e5a5710c4700
>>> change-id: 20230130-msm8974-qfprom-619c0e8f26eb
>>>
>>> Best regards,
> 
> 
> 
> 



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux