Currently configure_bank() returns void. Add some error checking on the regmap calls and propagate if there is any error. Signed-off-by: Georgi Djakov <georgi.djakov@xxxxxxxxxx> --- drivers/clk/qcom/clk-rcg.c | 62 +++++++++++++++++++++++++++++--------------- 1 file changed, 41 insertions(+), 21 deletions(-) diff --git a/drivers/clk/qcom/clk-rcg.c b/drivers/clk/qcom/clk-rcg.c index 59a093e56366..64d98c62459d 100644 --- a/drivers/clk/qcom/clk-rcg.c +++ b/drivers/clk/qcom/clk-rcg.c @@ -203,10 +203,10 @@ static u32 mn_to_reg(struct mn *mn, u32 m, u32 n, u32 val) return val; } -static void configure_bank(struct clk_dyn_rcg *rcg, const struct freq_tbl *f) +static int configure_bank(struct clk_dyn_rcg *rcg, const struct freq_tbl *f) { u32 ns, md, reg; - int bank, new_bank; + int bank, new_bank, ret; struct mn *mn; struct pre_div *p; struct src_sel *s; @@ -218,38 +218,55 @@ static void configure_bank(struct clk_dyn_rcg *rcg, const struct freq_tbl *f) enabled = __clk_is_enabled(hw->clk); - regmap_read(rcg->clkr.regmap, rcg->bank_reg, ®); + ret = regmap_read(rcg->clkr.regmap, rcg->bank_reg, ®); + if (ret) + return ret; bank = reg_to_bank(rcg, reg); new_bank = enabled ? !bank : bank; ns_reg = rcg->ns_reg[new_bank]; - regmap_read(rcg->clkr.regmap, ns_reg, &ns); + ret = regmap_read(rcg->clkr.regmap, ns_reg, &ns); + if (ret) + return ret; if (banked_mn) { mn = &rcg->mn[new_bank]; md_reg = rcg->md_reg[new_bank]; ns |= BIT(mn->mnctr_reset_bit); - regmap_write(rcg->clkr.regmap, ns_reg, ns); + ret = regmap_write(rcg->clkr.regmap, ns_reg, ns); + if (ret) + return ret; - regmap_read(rcg->clkr.regmap, md_reg, &md); + ret = regmap_read(rcg->clkr.regmap, md_reg, &md); + if (ret) + return ret; md = mn_to_md(mn, f->m, f->n, md); - regmap_write(rcg->clkr.regmap, md_reg, md); - + ret = regmap_write(rcg->clkr.regmap, md_reg, md); + if (ret) + return ret; ns = mn_to_ns(mn, f->m, f->n, ns); - regmap_write(rcg->clkr.regmap, ns_reg, ns); + ret = regmap_write(rcg->clkr.regmap, ns_reg, ns); + if (ret) + return ret; /* Two NS registers means mode control is in NS register */ if (rcg->ns_reg[0] != rcg->ns_reg[1]) { ns = mn_to_reg(mn, f->m, f->n, ns); - regmap_write(rcg->clkr.regmap, ns_reg, ns); + ret = regmap_write(rcg->clkr.regmap, ns_reg, ns); + if (ret) + return ret; } else { reg = mn_to_reg(mn, f->m, f->n, reg); - regmap_write(rcg->clkr.regmap, rcg->bank_reg, reg); + ret = regmap_write(rcg->clkr.regmap, rcg->bank_reg, reg); + if (ret) + return ret; } ns &= ~BIT(mn->mnctr_reset_bit); - regmap_write(rcg->clkr.regmap, ns_reg, ns); + ret = regmap_write(rcg->clkr.regmap, ns_reg, ns); + if (ret) + return ret; } if (banked_p) { @@ -259,13 +276,20 @@ static void configure_bank(struct clk_dyn_rcg *rcg, const struct freq_tbl *f) s = &rcg->s[new_bank]; ns = src_to_ns(s, s->parent_map[f->src], ns); - regmap_write(rcg->clkr.regmap, ns_reg, ns); + ret = regmap_write(rcg->clkr.regmap, ns_reg, ns); + if (ret) + return ret; if (enabled) { - regmap_read(rcg->clkr.regmap, rcg->bank_reg, ®); + ret = regmap_read(rcg->clkr.regmap, rcg->bank_reg, ®); + if (ret) + return ret; reg ^= BIT(rcg->mux_sel_bit); - regmap_write(rcg->clkr.regmap, rcg->bank_reg, reg); + ret = regmap_write(rcg->clkr.regmap, rcg->bank_reg, reg); + if (ret) + return ret; } + return 0; } static int clk_dyn_rcg_set_parent(struct clk_hw *hw, u8 index) @@ -292,9 +316,7 @@ static int clk_dyn_rcg_set_parent(struct clk_hw *hw, u8 index) f.pre_div = ns_to_pre_div(&rcg->p[bank], ns) + 1; f.src = index; - configure_bank(rcg, &f); - - return 0; + return configure_bank(rcg, &f); } /* @@ -567,9 +589,7 @@ static int __clk_dyn_rcg_set_rate(struct clk_hw *hw, unsigned long rate) if (!f) return -EINVAL; - configure_bank(rcg, f); - - return 0; + return configure_bank(rcg, f); } static int clk_dyn_rcg_set_rate(struct clk_hw *hw, unsigned long rate, -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html