[PATCH v3] bus: mhi: host: pci_generic: Add support for Quectel RM520N-GL modem

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The project is based on Qualcomm's sdx6x chips for laptop,so the mhi interface definition and
enumeration align with previous Quectel sdx24 configuration

Signed-off-by: Duke Xin(辛安文) <duke_xinanwen@xxxxxxx>
---
 drivers/bus/mhi/host/pci_generic.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/bus/mhi/host/pci_generic.c b/drivers/bus/mhi/host/pci_generic.c
index f39657f71483..416dabe2c282 100644
--- a/drivers/bus/mhi/host/pci_generic.c
+++ b/drivers/bus/mhi/host/pci_generic.c
@@ -335,6 +335,16 @@ static const struct mhi_pci_dev_info mhi_quectel_em1xx_info = {
 	.sideband_wake = true,
 };
 
+static const struct mhi_pci_dev_info mhi_quectel_rm5xx_info = {
+	.name = "quectel-rm5xx",
+	.edl = "qcom/prog_firehose_sdx6x.elf",
+	.config = &modem_quectel_em1xx_config,
+	.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
+	.dma_data_width = 32,
+	.mru_default = 32768,
+	.sideband_wake = true,
+};
+
 static const struct mhi_channel_config mhi_foxconn_sdx55_channels[] = {
 	MHI_CHANNEL_CONFIG_UL(0, "LOOPBACK", 32, 0),
 	MHI_CHANNEL_CONFIG_DL(1, "LOOPBACK", 32, 0),
@@ -569,6 +579,9 @@ static const struct pci_device_id mhi_pci_id_table[] = {
 		.driver_data = (kernel_ulong_t) &mhi_quectel_em1xx_info },
 	{ PCI_DEVICE(PCI_VENDOR_ID_QUECTEL, 0x2001), /* EM120R-GL for FCCL (sdx24) */
 		.driver_data = (kernel_ulong_t) &mhi_quectel_em1xx_info },
+	/* RM520N-GL (sdx6x), eSIM Project */
+	{ PCI_DEVICE(PCI_VENDOR_ID_QUECTEL, 0x1004),
+		.driver_data = (kernel_ulong_t) &mhi_quectel_rm5xx_info },
 	/* T99W175 (sdx55), Both for eSIM and Non-eSIM */
 	{ PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0ab),
 		.driver_data = (kernel_ulong_t) &mhi_foxconn_sdx55_info },
-- 
2.25.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux