Re: [PATCH 3/6] regulator: qcom_smd: Add MP5496 regulators

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 1/13/2023 8:54 PM, Konrad Dybcio wrote:


On 13.01.2023 16:03, devi priya wrote:
Adding support for PMIC MP5496 on IPQ9574 SoC

Co-developed-by: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
Signed-off-by: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
Signed-off-by: devi priya <quic_devipriy@xxxxxxxxxxx>
---
Please simply extend the existing MP5496 support with this
S1 regulator. If you don't explicitly define and set voltages
for the other vregs, they will not be probed.

Konrad
IPQ6018 and IPQ9574 platforms use the same PMIC MP5496 but they have a different power layout. IPQ9574 has S2 regulator which will be used for NSS scaling but S2 in IPQ6018 serves a different purpose. Hence it would not be possible to extend the existing MP5496 support for IPQ9574
  drivers/regulator/qcom_smd-regulator.c | 16 ++++++++++++++++
  1 file changed, 16 insertions(+)

diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c
index 9f2b58458841..1eb17d378897 100644
--- a/drivers/regulator/qcom_smd-regulator.c
+++ b/drivers/regulator/qcom_smd-regulator.c
@@ -767,6 +767,15 @@ static const struct regulator_desc mp5496_ldoa2 = {
  	.ops = &rpm_mp5496_ops,
  };
+static const struct regulator_desc ipq9574_mp5496_smpa1 = {
+	.linear_ranges = (struct linear_range[]) {
+		REGULATOR_LINEAR_RANGE(600000, 0, 37, 12500),
+	},
+	.n_linear_ranges = 1,
+	.n_voltages = 38,
+	.ops = &rpm_mp5496_ops,
+};
+
  static const struct regulator_desc pm2250_lvftsmps = {
  	.linear_ranges = (struct linear_range[]) {
  		REGULATOR_LINEAR_RANGE(320000, 0, 269, 4000),
@@ -799,6 +808,11 @@ static const struct rpm_regulator_data rpm_mp5496_regulators[] = {
  	{}
  };
+static const struct rpm_regulator_data rpm_ipq9574_mp5496_regulators[] = {
+	{ "s1", QCOM_SMD_RPM_SMPA, 1, &ipq9574_mp5496_smpa1, "s1" },
+	{}
+};
+
  static const struct rpm_regulator_data rpm_pm2250_regulators[] = {
  	{ "s1", QCOM_SMD_RPM_SMPA, 1, &pm2250_lvftsmps, "vdd_s1" },
  	{ "s2", QCOM_SMD_RPM_SMPA, 2, &pm2250_lvftsmps, "vdd_s2" },
@@ -1320,6 +1334,8 @@ static const struct rpm_regulator_data rpm_pms405_regulators[] = {
  };
static const struct of_device_id rpm_of_match[] = {
+	{ .compatible = "qcom,rpm-ipq9574-mp5496-regulators",
+		.data = &rpm_ipq9574_mp5496_regulators },
  	{ .compatible = "qcom,rpm-mp5496-regulators", .data = &rpm_mp5496_regulators },
  	{ .compatible = "qcom,rpm-pm2250-regulators", .data = &rpm_pm2250_regulators },
  	{ .compatible = "qcom,rpm-pm6125-regulators", .data = &rpm_pm6125_regulators },
Best Regards,
Devi Priya



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux