Re: [RFT PATCH 2/2] drm/msm/dsi: Stop unconditionally powering up DSI hosts at modeset

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Sat, 14 Jan 2023 at 01:56, Douglas Anderson <dianders@xxxxxxxxxxxx> wrote:
>
> In commit 7d8e9a90509f ("drm/msm/dsi: move DSI host powerup to modeset
> time"), we moved powering up DSI hosts to modeset time. This wasn't
> because it was an elegant design, but there were no better options.
>
> That commit actually ended up breaking ps8640, and thus was born
> commit ec7981e6c614 ("drm/msm/dsi: don't powerup at modeset time for
> parade-ps8640") as a temporary hack to un-break ps8640 by moving it to
> the old way of doing things. It turns out that ps8640 _really_ doesn't
> like its pre_enable() function to be called after
> dsi_mgr_bridge_power_on(). Specifically (from experimentation, not
> because I have any inside knowledge), it looks like the assertion of
> "RST#" in the ps8640 runtime resume handler seems like it's not
> allowed to happen after dsi_mgr_bridge_power_on()
>
> Recently, Dave Stevenson's series landed allowing bridges some control
> over pre_enable ordering. The meaty commit for our purposes is commit
> 4fb912e5e190 ("drm/bridge: Introduce pre_enable_prev_first to alter
> bridge init order"). As documented by that series, if a bridge doesn't
> set "pre_enable_prev_first" then we should use the old ordering.
>
> Now that we have the commit ("drm/bridge: tc358762: Set
> pre_enable_prev_first") we can go back to the old ordering, which also
> allows us to remove the ps8640 special case.
>
> One last note is that even without reverting commit 7d8e9a90509f
> ("drm/msm/dsi: move DSI host powerup to modeset time"), if you _just_
> revert the ps8640 special case and try it out then it doesn't seem to
> fail anymore. I spent time bisecting / debugging this and it turns out
> to be mostly luck, so we still want this patch to make sure it's
> solid. Specifically the reason it sorta works these days is because
> we implemented wait_hpd_asserted() in ps8640 now, plus the magic of
> "pm_runtime" autosuspend. The fact that we have wait_hpd_asserted()
> implemented means that we actually power the bridge chip up just a wee
> bit earlier and then the bridge happens to stay on because of
> autosuspend and thus ends up powered before dsi_mgr_bridge_power_on().

I had a small comment on your patch, but then I was distracted and
forgot to send it. See below.

>
> Cc: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
> Cc: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> Cc: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
> Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
> ---
>
>  drivers/gpu/drm/msm/dsi/dsi_manager.c | 68 +++++----------------------
>  1 file changed, 11 insertions(+), 57 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/dsi/dsi_manager.c b/drivers/gpu/drm/msm/dsi/dsi_manager.c
> index 3a1417397283..5e6b8d423b96 100644
> --- a/drivers/gpu/drm/msm/dsi/dsi_manager.c
> +++ b/drivers/gpu/drm/msm/dsi/dsi_manager.c
> @@ -34,32 +34,6 @@ static struct msm_dsi_manager msm_dsim_glb;
>  #define IS_SYNC_NEEDED()       (msm_dsim_glb.is_sync_needed)
>  #define IS_MASTER_DSI_LINK(id) (msm_dsim_glb.master_dsi_link_id == id)
>
> -#ifdef CONFIG_OF
> -static bool dsi_mgr_power_on_early(struct drm_bridge *bridge)
> -{
> -       struct drm_bridge *next_bridge = drm_bridge_get_next_bridge(bridge);
> -
> -       /*
> -        * If the next bridge in the chain is the Parade ps8640 bridge chip
> -        * then don't power on early since it seems to violate the expectations
> -        * of the firmware that the bridge chip is running.
> -        *
> -        * NOTE: this is expected to be a temporary special case. It's expected
> -        * that we'll eventually have a framework that allows the next level
> -        * bridge to indicate whether it needs us to power on before it or
> -        * after it. When that framework is in place then we'll use it and
> -        * remove this special case.
> -        */
> -       return !(next_bridge && next_bridge->of_node &&
> -                of_device_is_compatible(next_bridge->of_node, "parade,ps8640"));
> -}
> -#else
> -static inline bool dsi_mgr_power_on_early(struct drm_bridge *bridge)
> -{
> -       return true;
> -}
> -#endif
> -
>  static inline struct msm_dsi *dsi_mgr_get_dsi(int id)
>  {
>         return msm_dsim_glb.dsi[id];
> @@ -254,7 +228,7 @@ static void msm_dsi_manager_set_split_display(u8 id)
>         }
>  }
>
> -static void dsi_mgr_bridge_power_on(struct drm_bridge *bridge)
> +static void dsi_mgr_bridge_pre_enable(struct drm_bridge *bridge)

Can you please keep the dsi_mgr_bridge_power_on() as is and just
remove the now-legacy dsi_mgr_power_on_early().

>  {
>         int id = dsi_mgr_bridge_get_id(bridge);
>         struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id);
> @@ -300,36 +274,10 @@ static void dsi_mgr_bridge_power_on(struct drm_bridge *bridge)
>         if (is_bonded_dsi && msm_dsi1)
>                 msm_dsi_host_enable_irq(msm_dsi1->host);
>
> -       return;
> -
> -host1_on_fail:
> -       msm_dsi_host_power_off(host);
> -host_on_fail:
> -       dsi_mgr_phy_disable(id);
> -phy_en_fail:
> -       return;
> -}
> -
> -static void dsi_mgr_bridge_pre_enable(struct drm_bridge *bridge)
> -{
> -       int id = dsi_mgr_bridge_get_id(bridge);
> -       struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id);
> -       struct msm_dsi *msm_dsi1 = dsi_mgr_get_dsi(DSI_1);
> -       struct mipi_dsi_host *host = msm_dsi->host;
> -       bool is_bonded_dsi = IS_BONDED_DSI();
> -       int ret;
> -
> -       DBG("id=%d", id);
> -       if (!msm_dsi_device_connected(msm_dsi))
> -               return;
> -
>         /* Do nothing with the host if it is slave-DSI in case of bonded DSI */
>         if (is_bonded_dsi && !IS_MASTER_DSI_LINK(id))
>                 return;
>
> -       if (!dsi_mgr_power_on_early(bridge))
> -               dsi_mgr_bridge_power_on(bridge);
> -
>         ret = msm_dsi_host_enable(host);
>         if (ret) {
>                 pr_err("%s: enable host %d failed, %d\n", __func__, id, ret);
> @@ -349,7 +297,16 @@ static void dsi_mgr_bridge_pre_enable(struct drm_bridge *bridge)
>  host1_en_fail:
>         msm_dsi_host_disable(host);
>  host_en_fail:
> -
> +       msm_dsi_host_disable_irq(host);
> +       if (is_bonded_dsi && msm_dsi1) {
> +               msm_dsi_host_disable_irq(msm_dsi1->host);
> +               msm_dsi_host_power_off(msm_dsi1->host);
> +       }
> +host1_on_fail:
> +       msm_dsi_host_power_off(host);
> +host_on_fail:
> +       dsi_mgr_phy_disable(id);
> +phy_en_fail:
>         return;
>  }
>
> @@ -438,9 +395,6 @@ static void dsi_mgr_bridge_mode_set(struct drm_bridge *bridge,
>         msm_dsi_host_set_display_mode(host, adjusted_mode);
>         if (is_bonded_dsi && other_dsi)
>                 msm_dsi_host_set_display_mode(other_dsi->host, adjusted_mode);
> -
> -       if (dsi_mgr_power_on_early(bridge))
> -               dsi_mgr_bridge_power_on(bridge);
>  }
>
>  static enum drm_mode_status dsi_mgr_bridge_mode_valid(struct drm_bridge *bridge,
> --
> 2.39.0.314.g84b9a713c41-goog
>


-- 
With best wishes
Dmitry



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux