[RFC PATCH v2 05/22] usb: xhci: Add XHCI APIs to support USB offloading

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Some use cases, such as USB audio offloading, will allow for a DSP to take
over issuing USB transfers to the host controller.  In order for the DSP to
submit transfers for a particular endpoint, and to handle its events, the
client driver will need to query for some parameters allocated by XHCI.

- XHCI secondary interrupter event ring address
- XHCI transfer ring address (for a particular EP)
- Stop endpoint command API

Once the resources are handed off to the DSP, the offload begins, and the
main processor can enter idle.  When stopped, since there are no URBs
submitted from the main processor, the client will just issue a stop
endpoint command to halt any pending transfers.

Signed-off-by: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
---
 drivers/usb/host/xhci.c       | 130 ++++++++++++++++++++++++++++++++++
 include/linux/usb/xhci-intr.h |   8 +++
 2 files changed, 138 insertions(+)

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 003c6cc2fb55..36d81ecdb890 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -1580,6 +1580,136 @@ static int xhci_check_args(struct usb_hcd *hcd, struct usb_device *udev,
 	return 1;
 }
 
+int xhci_stop_endpoint(struct usb_device *udev,
+			struct usb_host_endpoint *ep)
+{
+	struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+	unsigned int ep_index;
+	struct xhci_virt_device *virt_dev;
+	struct xhci_command *cmd;
+	unsigned long flags;
+	int ret = 0;
+
+	ret = xhci_check_args(hcd, udev, ep, 1, true, __func__);
+	if (ret <= 0)
+		return ret;
+
+	cmd = xhci_alloc_command(xhci, true, GFP_NOIO);
+	if (!cmd)
+		return -ENOMEM;
+
+	spin_lock_irqsave(&xhci->lock, flags);
+	virt_dev = xhci->devs[udev->slot_id];
+	if (!virt_dev) {
+		ret = -ENODEV;
+		goto err;
+	}
+
+	ep_index = xhci_get_endpoint_index(&ep->desc);
+	if (virt_dev->eps[ep_index].ring &&
+			virt_dev->eps[ep_index].ring->dequeue) {
+		ret = xhci_queue_stop_endpoint(xhci, cmd, udev->slot_id,
+				ep_index, 0);
+		if (ret)
+			goto err;
+
+		xhci_ring_cmd_db(xhci);
+		spin_unlock_irqrestore(&xhci->lock, flags);
+
+		/* Wait for stop endpoint command to finish */
+		wait_for_completion(cmd->completion);
+
+		if (cmd->status == COMP_COMMAND_ABORTED ||
+				cmd->status == COMP_STOPPED) {
+			xhci_warn(xhci,
+				"stop endpoint command timeout for ep%d%s\n",
+				usb_endpoint_num(&ep->desc),
+				usb_endpoint_dir_in(&ep->desc) ? "in" : "out");
+			ret = -ETIME;
+				}
+		goto free_cmd;
+	}
+
+err:
+	spin_unlock_irqrestore(&xhci->lock, flags);
+free_cmd:
+	xhci_free_command(xhci, cmd);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(xhci_stop_endpoint);
+
+/* Retrieve the transfer ring base address for a specific endpoint. */
+phys_addr_t xhci_get_xfer_resource(struct usb_device *udev,
+					struct usb_host_endpoint *ep, dma_addr_t *dma)
+{
+	struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+	struct device *dev = hcd->self.sysdev;
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+	struct sg_table sgt;
+	phys_addr_t pa;
+	int ret;
+	unsigned int ep_index;
+	struct xhci_virt_device *virt_dev;
+	unsigned long flags;
+
+	if (!HCD_RH_RUNNING(hcd))
+		return 0;
+
+	ret = xhci_check_args(hcd, udev, ep, 1, true, __func__);
+	if (ret <= 0) {
+		xhci_err(xhci, "%s: invalid args\n", __func__);
+		return 0;
+	}
+
+	spin_lock_irqsave(&xhci->lock, flags);
+
+	virt_dev = xhci->devs[udev->slot_id];
+	ep_index = xhci_get_endpoint_index(&ep->desc);
+
+	if (virt_dev->eps[ep_index].ring &&
+		virt_dev->eps[ep_index].ring->first_seg) {
+
+		dma_get_sgtable(dev, &sgt,
+			virt_dev->eps[ep_index].ring->first_seg->trbs,
+			virt_dev->eps[ep_index].ring->first_seg->dma,
+			TRB_SEGMENT_SIZE);
+
+		*dma = virt_dev->eps[ep_index].ring->first_seg->dma;
+
+		pa = page_to_phys(sg_page(sgt.sgl));
+		sg_free_table(&sgt);
+		spin_unlock_irqrestore(&xhci->lock, flags);
+
+		return pa;
+	}
+	spin_unlock_irqrestore(&xhci->lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(xhci_get_xfer_resource);
+
+phys_addr_t xhci_get_ir_resource(struct usb_device *udev, struct xhci_interrupter *ir)
+{
+	struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+	struct device *dev = hcd->self.sysdev;
+	struct sg_table sgt;
+	phys_addr_t pa;
+
+	if (!ir)
+		return 0;
+
+	dma_get_sgtable(dev, &sgt, ir->event_ring->first_seg->trbs,
+		ir->event_ring->first_seg->dma, TRB_SEGMENT_SIZE);
+
+	pa = page_to_phys(sg_page(sgt.sgl));
+	sg_free_table(&sgt);
+
+	return pa;
+}
+EXPORT_SYMBOL_GPL(xhci_get_ir_resource);
+
 static int xhci_configure_endpoint(struct xhci_hcd *xhci,
 		struct usb_device *udev, struct xhci_command *command,
 		bool ctx_change, bool must_succeed);
diff --git a/include/linux/usb/xhci-intr.h b/include/linux/usb/xhci-intr.h
index 738b0f0481a6..d42cc9a1e698 100644
--- a/include/linux/usb/xhci-intr.h
+++ b/include/linux/usb/xhci-intr.h
@@ -80,7 +80,15 @@ struct xhci_interrupter {
 	u64	s3_erst_dequeue;
 };
 
+/* Secondary interrupter */
 struct xhci_interrupter *
 xhci_create_secondary_interrupter(struct usb_hcd *hcd, int intr_num);
 void xhci_remove_secondary_interrupter(struct usb_hcd *hcd, struct xhci_interrupter *ir);
+
+/* Offload */
+int xhci_stop_endpoint(struct usb_device *udev,
+			struct usb_host_endpoint *ep);
+phys_addr_t xhci_get_xfer_resource(struct usb_device *udev,
+					struct usb_host_endpoint *ep, dma_addr_t *dma);
+phys_addr_t xhci_get_ir_resource(struct usb_device *udev, struct xhci_interrupter *ir);
 #endif



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux