[PATCH v3 4/4] arm64: dts: qcom: sm8550: drop incorrect cells from serial

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The serial/UART device node does not have children with unit addresses,
so address/size cells are not correct.

Fixes: 377972ac743f ("arm64: dts: qcom: sm8550: add I2C Master Hub nodes")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>

---

Changes since v2:
1. Add tag
2. Correct typo in commit msg

Changes since v1:
1. New patch
---
 arch/arm64/boot/dts/qcom/sm8550.dtsi | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index 59756ec11564..c183eb5cb406 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -1487,8 +1487,6 @@ uart7: serial@a9c000 {
 				interconnect-names = "qup-core", "qup-config";
 				interconnects =	<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
 				status = "disabled";
 			};
 		};
-- 
2.34.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux