Re: [PATCH v1 07/14] drm/msm/dp: add dsc helper functions

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 23/01/2023 20:24, Kuogee Hsieh wrote:
Add DSC related supporting functions to calculate DSC related parameters.
In addition, DSC hardware encoder customized configuration parameters are
also included. Algorithms used to perform calculation are derived from
system engineer spreadsheet.

Overall impression. First rewrite this patch to use existing data structures and helpers. Then move the remnants to the drm/display/drm_dsc_helper.c.


Signed-off-by: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
---
  drivers/gpu/drm/msm/Makefile                   |   1 +
  drivers/gpu/drm/msm/disp/dpu1/dpu_dsc_helper.c | 537 +++++++++++++++++++++++++
  drivers/gpu/drm/msm/disp/dpu1/dpu_dsc_helper.h |  25 ++
  drivers/gpu/drm/msm/msm_drv.h                  |   4 +
  4 files changed, 567 insertions(+)
  create mode 100644 drivers/gpu/drm/msm/disp/dpu1/dpu_dsc_helper.c
  create mode 100644 drivers/gpu/drm/msm/disp/dpu1/dpu_dsc_helper.h

diff --git a/drivers/gpu/drm/msm/Makefile b/drivers/gpu/drm/msm/Makefile
index 7274c412..28cf52b 100644
--- a/drivers/gpu/drm/msm/Makefile
+++ b/drivers/gpu/drm/msm/Makefile
@@ -65,6 +65,7 @@ msm-$(CONFIG_DRM_MSM_DPU) += \
  	disp/dpu1/dpu_hw_catalog.o \
  	disp/dpu1/dpu_hw_ctl.o \
  	disp/dpu1/dpu_hw_dsc.o \
+	disp/dpu1/dpu_dsc_helper.o \
  	disp/dpu1/dpu_hw_interrupts.o \
  	disp/dpu1/dpu_hw_intf.o \
  	disp/dpu1/dpu_hw_lm.o \
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_dsc_helper.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_dsc_helper.c
new file mode 100644
index 00000000..48cef23
--- /dev/null
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_dsc_helper.c
@@ -0,0 +1,537 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2012-2023 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023. Qualcomm Innovation Center, Inc. All rights reserved
+ */
+
+#include "msm_drv.h"
+#include "dpu_kms.h"
+#include "dpu_hw_dsc.h"
+#include "dpu_dsc_helper.h"
+
+
+#define DPU_DSC_PPS_SIZE       128

doesn't sizeof(drm_dsc_picture_parameter_set) work instead?

+
+enum dpu_dsc_ratio_type {
+	DSC_V11_8BPC_8BPP,
+	DSC_V11_10BPC_8BPP,
+	DSC_V11_10BPC_10BPP,
+	DSC_V11_SCR1_8BPC_8BPP,
+	DSC_V11_SCR1_10BPC_8BPP,
+	DSC_V11_SCR1_10BPC_10BPP,
+	DSC_V12_444_8BPC_8BPP = DSC_V11_SCR1_8BPC_8BPP,
+	DSC_V12_444_10BPC_8BPP = DSC_V11_SCR1_10BPC_8BPP,
+	DSC_V12_444_10BPC_10BPP = DSC_V11_SCR1_10BPC_10BPP,
+	DSC_V12_422_8BPC_7BPP,
+	DSC_V12_422_8BPC_8BPP,
+	DSC_V12_422_10BPC_7BPP,
+	DSC_V12_422_10BPC_10BPP,
+	DSC_V12_420_8BPC_6BPP,
+	DSC_V12_420_10BPC_6BPP,
+	DSC_V12_420_10BPC_7_5BPP,
+	DSC_RATIO_TYPE_MAX
+};
+
+
+static u16 dpu_dsc_rc_buf_thresh[DSC_NUM_BUF_RANGES - 1] = {
+		0x0e, 0x1c, 0x2a, 0x38, 0x46, 0x54,
+		0x62, 0x69, 0x70, 0x77, 0x79, 0x7b, 0x7d, 0x7e
+};
+
+/*
+ * Rate control - Min QP values for each ratio type in dpu_dsc_ratio_type
+ */
+static char dpu_dsc_rc_range_min_qp[DSC_RATIO_TYPE_MAX][DSC_NUM_BUF_RANGES] = {
+	/* DSC v1.1 */
+	{0, 0, 1, 1, 3, 3, 3, 3, 3, 3, 5, 5, 5, 7, 13},
+	{0, 4, 5, 5, 7, 7, 7, 7, 7, 7, 9, 9, 9, 11, 17},
+	{0, 4, 5, 6, 7, 7, 7, 7, 7, 7, 9, 9, 9, 11, 15},
+	/* DSC v1.1 SCR and DSC v1.2 RGB 444 */
+	{0, 0, 1, 1, 3, 3, 3, 3, 3, 3, 5, 5, 5, 9, 12},
+	{0, 4, 5, 5, 7, 7, 7, 7, 7, 7, 9, 9, 9, 13, 16},
+	{0, 4, 5, 6, 7, 7, 7, 7, 7, 7, 9, 9, 9, 11, 15},
+	/* DSC v1.2 YUV422 */
+	{0, 0, 1, 2, 3, 3, 3, 3, 3, 3, 5, 5, 5, 7, 11},
+	{0, 0, 1, 2, 3, 3, 3, 3, 3, 3, 5, 5, 5, 7, 10},
+	{0, 4, 5, 6, 7, 7, 7, 7, 7, 7, 9, 9, 9, 11, 15},
+	{0, 2, 3, 4, 5, 5, 5, 6, 6, 7, 8, 8, 9, 11, 12},
+	/* DSC v1.2 YUV420 */
+	{0, 0, 1, 1, 3, 3, 3, 3, 3, 3, 5, 5, 5, 7, 10},
+	{0, 2, 3, 4, 6, 7, 7, 7, 7, 7, 9, 9, 9, 11, 14},
+	{0, 2, 3, 4, 5, 5, 5, 6, 6, 7, 8, 8, 9, 11, 12},
+};
+
+/*
+ * Rate control - Max QP values for each ratio type in dpu_dsc_ratio_type
+ */
+static char dpu_dsc_rc_range_max_qp[DSC_RATIO_TYPE_MAX][DSC_NUM_BUF_RANGES] = {
+	/* DSC v1.1 */
+	{4, 4, 5, 6, 7, 7, 7, 8, 9, 10, 11, 12, 13, 13, 15},
+	{4, 8, 9, 10, 11, 11, 11, 12, 13, 14, 15, 16, 17, 17, 19},
+	{7, 8, 9, 10, 11, 11, 11, 12, 13, 13, 14, 14, 15, 15, 16},
+	/* DSC v1.1 SCR and DSC v1.2 RGB 444 */
+	{4, 4, 5, 6, 7, 7, 7, 8, 9, 10, 10, 11, 11, 12, 13},
+	{8, 8, 9, 10, 11, 11, 11, 12, 13, 14, 14, 15, 15, 16, 17},
+	{7, 8, 9, 10, 11, 11, 11, 12, 13, 13, 14, 14, 15, 15, 16},
+	/* DSC v1.2 YUV422 */
+	{3, 4, 5, 6, 7, 7, 7, 8, 9, 9, 10, 10, 11, 11, 12},
+	{2, 4, 5, 6, 7, 7, 7, 8, 8, 9, 9, 9, 9, 10, 11},
+	{7, 8, 9, 10, 11, 11, 11, 12, 13, 13, 14, 14, 15, 15, 16},
+	{2, 5, 5, 6, 6, 7, 7, 8, 9, 9, 10, 11, 11, 12, 13},
+	/* DSC v1.2 YUV420 */
+	{2, 4, 5, 6, 7, 7, 7, 8, 8, 9, 9, 9, 9, 10, 12},
+	{2, 5, 7, 8, 9, 10, 11, 12, 12, 13, 13, 13, 13, 14, 15},
+	{2, 5, 5, 6, 6, 7, 7, 8, 9, 9, 10, 11, 11, 12, 13},
+	};
+
+/*
+ * Rate control - bpg offset values for each ratio type in dpu_dsc_ratio_type
+ */
+static char dpu_dsc_rc_range_bpg[DSC_RATIO_TYPE_MAX][DSC_NUM_BUF_RANGES] = {
+	/* DSC v1.1 */
+	{2, 0, 0, -2, -4, -6, -8, -8, -8, -10, -10, -12, -12, -12, -12},
+	{2, 0, 0, -2, -4, -6, -8, -8, -8, -10, -10, -12, -12, -12, -12},
+	{2, 0, 0, -2, -4, -6, -8, -8, -8, -10, -10, -10, -12, -12, -12},
+	/* DSC v1.1 SCR and DSC V1.2 RGB 444 */
+	{2, 0, 0, -2, -4, -6, -8, -8, -8, -10, -10, -12, -12, -12, -12},
+	{2, 0, 0, -2, -4, -6, -8, -8, -8, -10, -10, -12, -12, -12, -12},
+	{2, 0, 0, -2, -4, -6, -8, -8, -8, -10, -10, -10, -12, -12, -12},
+	/* DSC v1.2 YUV422 */
+	{2, 0, 0, -2, -4, -6, -8, -8, -8, -10, -10, -10, -12, -12, -12},
+	{2, 0, 0, -2, -4, -6, -8, -8, -8, -10, -10, -12, -12, -12, -12},
+	{2, 0, 0, -2, -4, -6, -8, -8, -8, -10, -10, -10, -12, -12, -12},
+	{10, 8, 6, 4, 2, 0, -2, -4, -6, -8, -10, -10, -12, -12, -12},
+	/* DSC v1.2 YUV420 */
+	{2, 0, 0, -2, -4, -6, -8, -8, -8, -10, -10, -12, -12, -12, -12},
+	{2, 0, 0, -2, -4, -6, -8, -8, -8, -10, -10, -12, -12, -12, -12},
+	{10, 8, 6, 4, 2, 0, -2, -4, -6, -8, -10, -10, -12, -12, -12},
+};
+
+static struct dpu_dsc_rc_init_params_lut {
+	u32 rc_quant_incr_limit0;
+	u32 rc_quant_incr_limit1;
+	u32 initial_fullness_offset;
+	u32 initial_xmit_delay;
+	u32 second_line_bpg_offset;
+	u32 second_line_offset_adj;
+	u32 flatness_min_qp;
+	u32 flatness_max_qp;
+}  dpu_dsc_rc_init_param_lut[] = {
+	/* DSC v1.1 */
+	{11, 11, 6144, 512, 0, 0, 3, 12}, /* DSC_V11_8BPC_8BPP */
+	{15, 15, 6144, 512, 0, 0, 7, 16}, /* DSC_V11_10BPC_8BPP */
+	{15, 15, 5632, 410, 0, 0, 7, 16}, /* DSC_V11_10BPC_10BPP */
+	/* DSC v1.1 SCR and DSC v1.2 RGB 444 */
+	{11, 11, 6144, 512, 0, 0, 3, 12}, /* DSC_V12_444_8BPC_8BPP or DSC_V11_SCR1_8BPC_8BPP */
+	{15, 15, 6144, 512, 0, 0, 7, 16}, /* DSC_V12_444_10BPC_8BPP or DSC_V11_SCR1_10BPC_8BPP */
+	{15, 15, 5632, 410, 0, 0, 7, 16}, /* DSC_V12_444_10BPC_10BPP or DSC_V11_SCR1_10BPC_10BPP */
+	/* DSC v1.2 YUV422 */
+	{11, 11, 5632, 410, 0, 0, 3, 12}, /* DSC_V12_422_8BPC_7BPP */
+	{11, 11, 2048, 341, 0, 0, 3, 12}, /* DSC_V12_422_8BPC_8BPP */
+	{15, 15, 5632, 410, 0, 0, 7, 16}, /* DSC_V12_422_10BPC_7BPP */
+	{15, 15, 2048, 273, 0, 0, 7, 16}, /* DSC_V12_422_10BPC_10BPP */
+	/* DSC v1.2 YUV420 */
+	{11, 11, 5632, 410, 0, 0, 3, 12},    /* DSC_V12_422_8BPC_7BPP */
+	{11, 11, 2048, 341, 12, 512, 3, 12}, /* DSC_V12_420_8BPC_6BPP */
+	{15, 15, 2048, 341, 12, 512, 7, 16}, /* DSC_V12_420_10BPC_6BPP */
+	{15, 15, 2048, 256, 12, 512, 7, 16}, /* DSC_V12_420_10BPC_7_5BPP */
+};
+
+/**
+ * Maps to lookup the dpu_dsc_ratio_type index used in rate control tables
+ */
+static struct dpu_dsc_table_index_lut {
+	u32 fmt;
+	u32 scr_ver;
+	u32 minor_ver;
+	u32 bpc;
+	u32 bpp;
+	u32 type;
+} dpu_dsc_index_map[] = {
+	/* DSC 1.1 formats - scr version is considered */
+	{MSM_CHROMA_444, 0, 1, 8, 8, DSC_V11_8BPC_8BPP},
+	{MSM_CHROMA_444, 0, 1, 10, 8, DSC_V11_10BPC_8BPP},
+	{MSM_CHROMA_444, 0, 1, 10, 10, DSC_V11_10BPC_10BPP},
+
+	{MSM_CHROMA_444, 1, 1, 8, 8, DSC_V11_SCR1_8BPC_8BPP},
+	{MSM_CHROMA_444, 1, 1, 10, 8, DSC_V11_SCR1_10BPC_8BPP},
+	{MSM_CHROMA_444, 1, 1, 10, 10, DSC_V11_SCR1_10BPC_10BPP},
+
+	/* DSC 1.2 formats - scr version is no-op */

Such distinctions begs to split this table into a pair or three of them.

+	{MSM_CHROMA_444, -1, 2, 8, 8, DSC_V12_444_8BPC_8BPP},
+	{MSM_CHROMA_444, -1, 2, 10, 8, DSC_V12_444_10BPC_8BPP},
+	{MSM_CHROMA_444, -1, 2, 10, 10, DSC_V12_444_10BPC_10BPP},
+
+	{MSM_CHROMA_422, -1, 2, 8, 7, DSC_V12_422_8BPC_7BPP},
+	{MSM_CHROMA_422, -1, 2, 8, 8, DSC_V12_422_8BPC_8BPP},
+	{MSM_CHROMA_422, -1, 2, 10, 7, DSC_V12_422_10BPC_7BPP},
+	{MSM_CHROMA_422, -1, 2, 10, 10, DSC_V12_422_10BPC_10BPP},
+
+	{MSM_CHROMA_420, -1, 2, 8, 6, DSC_V12_420_8BPC_6BPP},
+	{MSM_CHROMA_420, -1, 2, 10, 6, DSC_V12_420_10BPC_6BPP},
+};
+
+static int _get_rc_table_index(struct drm_dsc_config *dsc, int scr_ver)
+{
+	u32 bpp, bpc, i, fmt = MSM_CHROMA_444;
+
+	if (dsc->dsc_version_major != 0x1) {
+		DPU_ERROR("unsupported major version %d\n",
+				dsc->dsc_version_major);
+		return -EINVAL;
+	}
+
+	bpc = dsc->bits_per_component;
+	bpp = DSC_BPP(*dsc);
+
+	if (dsc->native_422)
+		fmt = MSM_CHROMA_422;
+	else if (dsc->native_420)
+		fmt = MSM_CHROMA_420;
+
+
+	for (i = 0; i < ARRAY_SIZE(dpu_dsc_index_map); i++) {
+		if (dsc->dsc_version_minor == dpu_dsc_index_map[i].minor_ver &&
+				fmt ==  dpu_dsc_index_map[i].fmt &&
+				bpc == dpu_dsc_index_map[i].bpc &&
+				bpp == dpu_dsc_index_map[i].bpp &&
+				(dsc->dsc_version_minor != 0x1 ||
+					scr_ver == dpu_dsc_index_map[i].scr_ver))
+			return dpu_dsc_index_map[i].type;
+	}
+
+	DPU_ERROR("unsupported DSC v%d.%dr%d, bpc:%d, bpp:%d, fmt:0x%x\n",
+			dsc->dsc_version_major, dsc->dsc_version_minor,
+			scr_ver, bpc, bpp, fmt);
+	return -EINVAL;
+}
+
+u8 _get_dsc_v1_2_bpg_offset(struct drm_dsc_config *dsc)
+{
+	u8 bpg_offset = 0;
+	u8 uncompressed_bpg_rate;
+	u8 bpp = DSC_BPP(*dsc);
+
+	if (dsc->slice_height < 8)
+		bpg_offset = 2 * (dsc->slice_height - 1);
+	else if (dsc->slice_height < 20)
+		bpg_offset = 12;
+	else if (dsc->slice_height <= 30)
+		bpg_offset = 13;
+	else if (dsc->slice_height < 42)
+		bpg_offset = 14;
+	else
+		bpg_offset = 15;
+
+	if (dsc->native_422)
+		uncompressed_bpg_rate = 3 * bpp * 4;
+	else if (dsc->native_420)
+		uncompressed_bpg_rate = 3 * bpp;
+	else
+		uncompressed_bpg_rate = (3 * bpp + 2) * 3;
+
+	if (bpg_offset < (uncompressed_bpg_rate - (3 * bpp)))
+		return bpg_offset;
+	else
+		return (uncompressed_bpg_rate - (3 * bpp));
+}
+
+int dpu_dsc_populate_dsc_config(struct drm_dsc_config *dsc, int scr_ver)
+{
+	int bpp, bpc;
+	int groups_per_line, groups_total;
+	int min_rate_buffer_size;
+	int hrd_delay;
+	int pre_num_extra_mux_bits, num_extra_mux_bits;
+	int slice_bits;
+	int data;
+	int final_value, final_scale;
+	struct dpu_dsc_rc_init_params_lut *rc_param_lut;
+	u32 slice_width_mod;
+	int i, ratio_idx;

We just got rid of a duplicate of drm_dsc_compute_rc_parameters(), so we are not going to introduce another one. Please use that function to compute relevant parameters.

+
+	dsc->rc_model_size = 8192;
+
+	if ((dsc->dsc_version_major == 0x1) &&
+			(dsc->dsc_version_minor == 0x1)) {
+		if (scr_ver == 0x1)
+			dsc->first_line_bpg_offset = 15;
+		else
+			dsc->first_line_bpg_offset = 12;
+	} else if (dsc->dsc_version_minor == 0x2) {
+		dsc->first_line_bpg_offset = _get_dsc_v1_2_bpg_offset(dsc);
+	}
+
+	dsc->rc_edge_factor = 6;
+	dsc->rc_tgt_offset_high = 3;
+	dsc->rc_tgt_offset_low = 3;
+	dsc->simple_422 = 0;
+	dsc->convert_rgb = !(dsc->native_422 | dsc->native_420);
+	dsc->vbr_enable = 0;
+
+	bpp = DSC_BPP(*dsc);
+	bpc = dsc->bits_per_component;
+
+	ratio_idx = _get_rc_table_index(dsc, scr_ver);
+	if ((ratio_idx < 0) || (ratio_idx >= DSC_RATIO_TYPE_MAX))
+		return -EINVAL;
+
+
+	for (i = 0; i < DSC_NUM_BUF_RANGES - 1; i++)
+		dsc->rc_buf_thresh[i] = dpu_dsc_rc_buf_thresh[i];
+
+	for (i = 0; i < DSC_NUM_BUF_RANGES; i++) {
+		dsc->rc_range_params[i].range_min_qp =
+			dpu_dsc_rc_range_min_qp[ratio_idx][i];
+		dsc->rc_range_params[i].range_max_qp =
+			dpu_dsc_rc_range_max_qp[ratio_idx][i];
+		dsc->rc_range_params[i].range_bpg_offset =
+			dpu_dsc_rc_range_bpg[ratio_idx][i];
+	}
+
+	rc_param_lut = &dpu_dsc_rc_init_param_lut[ratio_idx];
+	dsc->rc_quant_incr_limit0 = rc_param_lut->rc_quant_incr_limit0;
+	dsc->rc_quant_incr_limit1 = rc_param_lut->rc_quant_incr_limit1;
+	dsc->initial_offset = rc_param_lut->initial_fullness_offset;
+	dsc->initial_xmit_delay = rc_param_lut->initial_xmit_delay;
+	dsc->second_line_bpg_offset = rc_param_lut->second_line_bpg_offset;
+	dsc->second_line_offset_adj = rc_param_lut->second_line_offset_adj;
+	dsc->flatness_min_qp = rc_param_lut->flatness_min_qp;
+	dsc->flatness_max_qp = rc_param_lut->flatness_max_qp;
+
+	slice_width_mod = dsc->slice_width;
+	if (dsc->native_422 || dsc->native_420) {
+		slice_width_mod = dsc->slice_width / 2;
+		bpp = bpp * 2;
+	}
+
+	dsc->line_buf_depth = bpc + 1;
+	dsc->mux_word_size = bpc > 10 ? DSC_MUX_WORD_SIZE_12_BPC : DSC_MUX_WORD_SIZE_8_10_BPC;
+
+	if ((dsc->dsc_version_minor == 0x2) && (dsc->native_420))
+		dsc->nsl_bpg_offset = (2048 * (DIV_ROUND_UP(dsc->second_line_bpg_offset,
+				(dsc->slice_height - 1))));
+
+	groups_per_line = DIV_ROUND_UP(slice_width_mod, 3);
+
+	dsc->slice_chunk_size = slice_width_mod * bpp / 8;
+	if ((slice_width_mod * bpp) % 8)
+		dsc->slice_chunk_size++;
+
+	/* rbs-min */
+	min_rate_buffer_size =  dsc->rc_model_size - dsc->initial_offset +
+			dsc->initial_xmit_delay * bpp +
+			groups_per_line * dsc->first_line_bpg_offset;
+
+	hrd_delay = DIV_ROUND_UP(min_rate_buffer_size, bpp);
+
+	dsc->initial_dec_delay = hrd_delay - dsc->initial_xmit_delay;
+
+	dsc->initial_scale_value = 8 * dsc->rc_model_size /
+			(dsc->rc_model_size - dsc->initial_offset);
+
+	slice_bits = 8 * dsc->slice_chunk_size * dsc->slice_height;
+
+	groups_total = groups_per_line * dsc->slice_height;
+
+	data = dsc->first_line_bpg_offset * 2048;
+
+	dsc->nfl_bpg_offset = DIV_ROUND_UP(data, (dsc->slice_height - 1));
+
+	if (dsc->native_422)
+		pre_num_extra_mux_bits = 4 * dsc->mux_word_size + (4 * bpc + 4) + (3 * 4 * bpc) - 2;
+	else if (dsc->native_420)
+		pre_num_extra_mux_bits = 3 * dsc->mux_word_size + (4 * bpc + 4) + (2 * 4 * bpc) - 2;
+	else
+		pre_num_extra_mux_bits = 3 * (dsc->mux_word_size + (4 * bpc + 4) - 2);
+
+	num_extra_mux_bits = pre_num_extra_mux_bits - (dsc->mux_word_size -
+		((slice_bits - pre_num_extra_mux_bits) % dsc->mux_word_size));
+
+	data = 2048 * (dsc->rc_model_size - dsc->initial_offset
+		+ num_extra_mux_bits);
+	dsc->slice_bpg_offset = DIV_ROUND_UP(data, groups_total);
+
+	data = dsc->initial_xmit_delay * bpp;
+	final_value =  dsc->rc_model_size - data + num_extra_mux_bits;
+
+	final_scale = 8 * dsc->rc_model_size /
+		(dsc->rc_model_size - final_value);
+
+	dsc->final_offset = final_value;
+
+	data = (final_scale - 9) * (dsc->nfl_bpg_offset +
+		dsc->slice_bpg_offset);
+	dsc->scale_increment_interval = (2048 * dsc->final_offset) / data;
+
+	dsc->scale_decrement_interval = groups_per_line /
+		(dsc->initial_scale_value - 8);
+
+	return 0;
+}
+
+bool dpu_dsc_ich_reset_override_needed(bool pu_en,
+		struct msm_display_dsc_info *dsc_info)
+{
+	/*
+	 * As per the DSC spec, ICH_RESET can be either end of the slice line
+	 * or at the end of the slice. HW internally generates ich_reset at
+	 * end of the slice line if DSC_MERGE is used or encoder has two
+	 * soft slices. However, if encoder has only 1 soft slice and DSC_MERGE
+	 * is not used then it will generate ich_reset at the end of slice.
+	 *
+	 * Now as per the spec, during one PPS session, position where
+	 * ich_reset is generated should not change. Now if full-screen frame
+	 * has more than 1 soft slice then HW will automatically generate
+	 * ich_reset at the end of slice_line. But for the same panel, if
+	 * partial frame is enabled and only 1 encoder is used with 1 slice,
+	 * then HW will generate ich_reset at end of the slice. This is a
+	 * mismatch. Prevent this by overriding HW's decision.
+	 */
+	return pu_en && dsc_info && (dsc_info->drm_dsc.slice_count > 1) &&
+		(dsc_info->drm_dsc.slice_width == dsc_info->drm_dsc.pic_width);
+}
+
+int dpu_dsc_initial_line_calc(struct msm_display_dsc_info *dsc_info,
+				int enc_ip_width, int dsc_cmn_mode)
+{
+	int max_ssm_delay, max_se_size, max_muxword_size;
+	int compress_bpp_group, obuf_latency, input_ssm_out_latency;
+	int base_hs_latency, chunk_bits, ob_data_width;
+	int output_rate_extra_budget_bits, multi_hs_extra_budget_bits;
+	int multi_hs_extra_latency,  mux_word_size;
+	int ob_data_width_4comps, ob_data_width_3comps;
+	int output_rate_ratio_complement, container_slice_width;
+	int rtl_num_components, multi_hs_c, multi_hs_d;
+
+	int bpc = dsc_info->drm_dsc.bits_per_component;
+	int bpp = DSC_BPP(dsc_info->drm_dsc);
+	bool native_422 = dsc_info->drm_dsc.native_422;
+	bool native_420 = dsc_info->drm_dsc.native_420;
+
+	/* Hardent core config */
+	int multiplex_mode_enable = 0, split_panel_enable = 0;
+	int rtl_max_bpc = 10, rtl_output_data_width = 64;
+	int pipeline_latency = 28;
+
+	if (dsc_cmn_mode & DSC_MODE_MULTIPLEX)
+		multiplex_mode_enable = 1;
+	if (dsc_cmn_mode & DSC_MODE_SPLIT_PANEL)
+		split_panel_enable = 1;
+	container_slice_width = (native_422 ?
+			dsc_info->drm_dsc.slice_width / 2 : dsc_info->drm_dsc.slice_width);
+	max_muxword_size = (rtl_max_bpc >= 12) ? 64 : 48;
+	max_se_size = 4 * (rtl_max_bpc + 1);
+	max_ssm_delay = max_se_size + max_muxword_size - 1;
+	mux_word_size = (bpc >= 12) ? 64 : 48;
+	compress_bpp_group = native_422 ? (2 * bpp) : bpp;
+	input_ssm_out_latency = pipeline_latency + 3 * (max_ssm_delay + 2)
+			* dsc_info->num_active_ss_per_enc;
+	rtl_num_components = (native_420 || native_422) ? 4 : 3;
+	ob_data_width_4comps = (rtl_output_data_width >= (2 *
+			max_muxword_size)) ?
+			rtl_output_data_width :
+			(2 * rtl_output_data_width);
+	ob_data_width_3comps = (rtl_output_data_width >= max_muxword_size) ?
+			rtl_output_data_width : 2 * rtl_output_data_width;
+	ob_data_width = (rtl_num_components == 4) ?
+			ob_data_width_4comps : ob_data_width_3comps;
+	obuf_latency = DIV_ROUND_UP((9 * ob_data_width + mux_word_size),
+			compress_bpp_group) + 1;
+	base_hs_latency = dsc_info->drm_dsc.initial_xmit_delay +
+		input_ssm_out_latency + obuf_latency;
+	chunk_bits = 8 * dsc_info->drm_dsc.slice_chunk_size;
+	output_rate_ratio_complement = ob_data_width - compress_bpp_group;
+	output_rate_extra_budget_bits =
+		(output_rate_ratio_complement * chunk_bits) >>
+		((ob_data_width == 128) ? 7 : 6);
+	multi_hs_c = split_panel_enable * multiplex_mode_enable;
+	multi_hs_d = (dsc_info->num_active_ss_per_enc > 1) * (ob_data_width > compress_bpp_group);
+	multi_hs_extra_budget_bits = multi_hs_c ?
+				chunk_bits : (multi_hs_d ? chunk_bits :
+					output_rate_extra_budget_bits);
+	multi_hs_extra_latency = DIV_ROUND_UP(multi_hs_extra_budget_bits,
+			compress_bpp_group);
+	dsc_info->initial_lines = DIV_ROUND_UP((base_hs_latency +
+				multi_hs_extra_latency),
+			container_slice_width);
+
+	return 0;
+}
+
+int dpu_dsc_populate_dsc_private_params(struct msm_display_dsc_info *dsc_info,
+					int intf_width)
+{
+	int  mod_offset;
+	int slice_per_pkt, slice_per_intf;
+	int bytes_in_slice, total_bytes_per_intf;
+	u16 bpp;
+	u32 bytes_in_dsc_pair;
+	u32 total_bytes_in_dsc_pair;
+
+	if (!dsc_info || !dsc_info->drm_dsc.slice_width ||
+			!dsc_info->drm_dsc.slice_height ||
+			intf_width < dsc_info->drm_dsc.slice_width) {
+		DPU_ERROR("invalid input, intf_width=%d slice_width=%d\n",
+			intf_width, dsc_info ? dsc_info->drm_dsc.slice_width :
+			-1);
+		return -EINVAL;
+	}
+
+	mod_offset = dsc_info->drm_dsc.slice_width % 3;
+
+
+	switch (mod_offset) {
+	case 0:
+		dsc_info->slice_last_group_size = 2;
+		break;
+	case 1:
+		dsc_info->slice_last_group_size = 0;
+		break;
+	case 2:
+		dsc_info->slice_last_group_size = 1;
+		break;
+	default:
+		break;
+	}
+
+	dsc_info->det_thresh_flatness =
+		2 << (dsc_info->drm_dsc.bits_per_component - 8);
+
+	slice_per_pkt = dsc_info->slice_per_pkt;
+	slice_per_intf = DIV_ROUND_UP(intf_width,
+			dsc_info->drm_dsc.slice_width);
+
+
+	/*
+	 * If slice_per_pkt is greater than slice_per_intf then default to 1.
+	 * This can happen during partial update.
+	 */
+	if (slice_per_pkt > slice_per_intf)
+		slice_per_pkt = 1;
+
+	bpp = DSC_BPP(dsc_info->drm_dsc);
+	bytes_in_slice = DIV_ROUND_UP(dsc_info->drm_dsc.slice_width * bpp, 8);
+	total_bytes_per_intf = bytes_in_slice * slice_per_intf;
+
+
+	dsc_info->eol_byte_num = total_bytes_per_intf % 3;
+	dsc_info->pclk_per_line =  DIV_ROUND_UP(total_bytes_per_intf, 3);
+	dsc_info->bytes_in_slice = bytes_in_slice;
+	dsc_info->bytes_per_pkt = bytes_in_slice * slice_per_pkt;
+	dsc_info->pkt_per_line = slice_per_intf / slice_per_pkt;
+
+
+	bytes_in_dsc_pair = DIV_ROUND_UP(bytes_in_slice * 2, 3);
+	if (bytes_in_dsc_pair % 8) {
+		dsc_info->dsc_4hsmerge_padding = 8 - (bytes_in_dsc_pair % 8);
+		total_bytes_in_dsc_pair = bytes_in_dsc_pair +
+				dsc_info->dsc_4hsmerge_padding;
+		if (total_bytes_in_dsc_pair % 16)
+			dsc_info->dsc_4hsmerge_alignment = 16 -
+					(total_bytes_in_dsc_pair % 16);
+	}
+
+	return 0;
+}
+
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_dsc_helper.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_dsc_helper.h
new file mode 100644
index 00000000..9f26455
--- /dev/null
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_dsc_helper.h
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2020 - 2023 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023. Qualcomm Innovation Center, Inc. All rights reserved
+ */
+
+#ifndef __DPU_DSC_HELPER_H__
+#define __DPU_DSC_HELPER_H__
+
+#include "msm_drv.h"
+
+#define DSC_1_1_PPS_PARAMETER_SET_ELEMENTS   88

Where is this used?

+
+int dpu_dsc_populate_dsc_config(struct drm_dsc_config *dsc, int scr_ver);
+
+int dpu_dsc_populate_dsc_private_params(struct msm_display_dsc_info *dsc_info,
+					int intf_width);
+
+bool dpu_dsc_ich_reset_override_needed(bool pu_en, struct msm_display_dsc_info *dsc);
+
+int dpu_dsc_initial_line_calc(struct msm_display_dsc_info *dsc,
+				int enc_ip_width, int dsc_cmn_mode);
+
+#endif /* __DPU_DSC_HELPER_H__ */
+
diff --git a/drivers/gpu/drm/msm/msm_drv.h b/drivers/gpu/drm/msm/msm_drv.h
index f155803..cf4eb8d 100644
--- a/drivers/gpu/drm/msm/msm_drv.h
+++ b/drivers/gpu/drm/msm/msm_drv.h
@@ -57,6 +57,10 @@ struct msm_disp_state;
  #define MAX_CRTCS      8
  #define MAX_BRIDGES    8
+#define MSM_CHROMA_444 0x0
+#define MSM_CHROMA_422 0x1
+#define MSM_CHROMA_420 0x2

enum?

+
  #define FRAC_16_16(mult, div)    (((mult) << 16) / (div))
enum msm_dp_controller {

--
With best wishes
Dmitry




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux