On 23.01.2023 13:56, Krzysztof Kozlowski wrote:
> Node names should be generic (as Devicetree spec mandates), so use
> "bluetooth" for BT node.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Konrad
>
> Changes since v1:
> 1. Fix also msm8996-xiaomi-common
> ---
> arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi | 2 +-
> arch/arm64/boot/dts/qcom/sc7180-idp.dts | 2 +-
> arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi | 2 +-
> 3 files changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
> index 5b47b8de69da..2acfed28e3cb 100644
> --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
> @@ -229,7 +229,7 @@ &blsp1_uart2 {
> status = "okay";
> label = "QCA_UART";
>
> - bluetooth: qca6174a {
> + bluetooth: bluetooth {
> compatible = "qcom,qca6174-bt";
>
> enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
> diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> index 774f9d45f051..6ea8dd7d3e01 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> +++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> @@ -430,7 +430,7 @@ &uart3 {
> pinctrl-names = "default", "sleep";
> pinctrl-1 = <&qup_uart3_sleep>;
>
> - bluetooth: wcn3990-bt {
> + bluetooth: bluetooth {
> compatible = "qcom,wcn3990-bt";
> vddio-supply = <&vreg_l10a_1p8>;
> vddxo-supply = <&vreg_l1c_1p8>;
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
> index a78075155310..e19178c1ec44 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
> @@ -862,7 +862,7 @@ &uart6 {
>
> pinctrl-0 = <&qup_uart6_4pin>;
>
> - bluetooth: wcn3990-bt {
> + bluetooth: bluetooth {
> compatible = "qcom,wcn3990-bt";
> vddio-supply = <&src_pp1800_s4a>;
> vddxo-supply = <&pp1800_l7a_wcn3990>;
