The qcom-cpufreq-nvmem driver supports 2 kind of devices:
- pre-cpr that doesn't have power-domains and base everything on nvmem
cells and multiple named microvolt bindings
- cpr-based that require power-domain in the cpu nodes and use various
source to decide the correct voltage and freq
When the schema was introduced, it was wrongly set to always require these
binding but this is not the case for pre-cpr devices.
Make the power-domain optional and set them required only for qcs404
based devices.
While at it also make more clear what the opp-table supports by adding
ref to the opp-v2-kryo-cpu and opp-v2-qcom-level schema.
Fixes: ec24d1d55469 ("dt-bindings: opp: Convert qcom-nvmem-cpufreq to DT schema")
Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
---
.../bindings/cpufreq/qcom-cpufreq-nvmem.yaml | 81 +++++++++++++------
1 file changed, 56 insertions(+), 25 deletions(-)
diff --git a/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml b/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml
index 9c086eac6ca7..6f5e7904181f 100644
--- a/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml
+++ b/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml
@@ -17,6 +17,9 @@ description: |
on the CPU OPP in use. The CPUFreq driver sets the CPR power domain level
according to the required OPPs defined in the CPU OPP tables.
+ For old implementation efuses are parsed to select the correct opp table and
+ voltage and CPR is not supported/used.
+
select:
properties:
compatible:
@@ -33,37 +36,65 @@ select:
required:
- compatible
-properties:
- cpus:
- type: object
-
- patternProperties:
- '^cpu@[0-9a-f]+$':
- type: object
-
- properties:
- power-domains:
- maxItems: 1
-
- power-domain-names:
- items:
- - const: cpr
-
- required:
- - power-domains
- - power-domain-names
-
patternProperties:
'^opp-table(-[a-z0-9]+)?$':
- if:
+ allOf:
+ - if:
+ properties:
+ compatible:
+ const: operating-points-v2-kryo-cpu
+ then:
+ $ref: /schemas/opp/opp-v2-kryo-cpu.yaml#
+
+ - if:
+ properties:
+ compatible:
+ const: operating-points-v2-qcom-level
+ then:
+ $ref: /schemas/opp/opp-v2-qcom-level.yaml#
+
+ unevaluatedProperties: false
+
+allOf:
+ - if:
properties:
compatible:
- const: operating-points-v2-kryo-cpu
+ contains:
+ enum:
+ - qcom,qcs404
+
then:
+ properties:
+ cpus:
+ type: object
+
+ patternProperties:
+ '^cpu@[0-9a-f]+$':
+ type: object
+
+ properties:
+ power-domains:
+ maxItems: 1
+
+ power-domain-names:
+ items:
+ - const: cpr
+
+ required:
+ - power-domains
+ - power-domain-names
+
patternProperties:
- '^opp-?[0-9]+$':
- required:
- - required-opps
+ '^opp-table(-[a-z0-9]+)?$':
+ if:
+ properties:
+ compatible:
+ const: operating-points-v2-kryo-cpu
+ then:
+ patternProperties:
+ '^opp-?[0-9]+$':
+ required:
+ - required-opps
additionalProperties: true
--
2.38.1
