Re: [PATCH v3 4/8] clk: qcom: cbf-msm8996: scale CBF clock according to the CPUfreq

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Quoting Dmitry Baryshkov (2023-01-19 22:14:13)
> Turn CBF into the interconnect provider. Scale CBF frequency (bandwidth)
> according to CPU frequencies.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> ---
>  drivers/clk/qcom/clk-cbf-8996.c | 143 +++++++++++++++++++++++++++++++-
>  1 file changed, 142 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/clk/qcom/clk-cbf-8996.c b/drivers/clk/qcom/clk-cbf-8996.c
> index 9cde0e660228..b049b4f7b270 100644
> --- a/drivers/clk/qcom/clk-cbf-8996.c
> +++ b/drivers/clk/qcom/clk-cbf-8996.c
> @@ -5,11 +5,14 @@
>  #include <linux/bitfield.h>
>  #include <linux/clk.h>
>  #include <linux/clk-provider.h>
> +#include <linux/interconnect-provider.h>
>  #include <linux/of.h>
>  #include <linux/module.h>
>  #include <linux/platform_device.h>
>  #include <linux/regmap.h>
>  
> +#include <dt-bindings/interconnect/qcom,msm8996-cbf.h>
> +
>  #include "clk-alpha-pll.h"
>  #include "clk-regmap.h"
>  
> @@ -225,6 +228,133 @@ static const struct regmap_config cbf_msm8996_regmap_config = {
>         .val_format_endian      = REGMAP_ENDIAN_LITTLE,
>  };
>  
> +#ifdef CONFIG_INTERCONNECT

Can you move this driver to drivers/interconnect/ ?

> +struct qcom_msm8996_cbf_icc_provider {
> +       struct icc_provider provider;
> +       struct clk *clk;
> +};
> +
> +#define to_qcom_cbf_provider(_provider) \
> +       container_of(_provider, struct qcom_msm8996_cbf_icc_provider, provider)
> +
> +enum {
> +       CBF_MASTER_NODE = 2000,
[...]
> +static int qcom_msm8996_cbf_icc_remove(struct platform_device *pdev)
> +{
> +       struct icc_provider *provider = platform_get_drvdata(pdev);
> +
> +       icc_nodes_remove(provider);
> +       icc_provider_del(provider);
> +
> +       return 0;
> +}
> +#else
> +static int qcom_msm8996_cbf_icc_register(struct platform_device *pdev)
> +{
> +       dev_warn(&pdev->dev, "interconnects support is disabled, CBF clock is fixed\n");
> +
> +       return 0;
> +}
> +#define qcom_msm8996_cbf_icc_remove(pdev) (0)

It's like two drivers in one.

> +#endif
> +
>  static int qcom_msm8996_cbf_probe(struct platform_device *pdev)
>  {
>         void __iomem *base;




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux