Add the mdss_ prefix to DSIn labels, so that the hardware blocks can
be organized near each other while retaining the alphabetical order
in device DTs when referencing by label.
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 2 +-
arch/arm64/boot/dts/qcom/sm8350.dtsi | 10 +++++-----
2 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
index 5a4c4ea4d122..df841230d1b7 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
@@ -309,7 +309,7 @@ port@0 {
reg = <0>;
lt9611_a: endpoint {
- remote-endpoint = <&dsi0_out>;
+ remote-endpoint = <&mdss_dsi0_out>;
};
};
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index b09eb8880376..0f9427f3319f 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -2952,7 +2952,7 @@ ports {
port@0 {
reg = <0>;
dpu_intf1_out: endpoint {
- remote-endpoint = <&dsi0_in>;
+ remote-endpoint = <&mdss_dsi0_in>;
};
};
};
@@ -3024,14 +3024,14 @@ ports {
port@0 {
reg = <0>;
- dsi0_in: endpoint {
+ mdss_dsi0_in: endpoint {
remote-endpoint = <&dpu_intf1_out>;
};
};
port@1 {
reg = <1>;
- dsi0_out: endpoint {
+ mdss_dsi0_out: endpoint {
};
};
};
@@ -3122,13 +3122,13 @@ ports {
port@0 {
reg = <0>;
- dsi1_in: endpoint {
+ mdss_dsi1_in: endpoint {
};
};
port@1 {
reg = <1>;
- dsi1_out: endpoint {
+ mdss_dsi1_out: endpoint {
};
};
};
--
2.39.1
