Add the camera clock controller node and CCI nodes to sm6350 dtsi and enable
the i2c busses on Fairphone 4 dts.
This is tested using PM8008 regulator patches from the lists which power the
cameras, and using i2cdetect/i2cget/i2cset reading the sensor ID registers.
To: Andy Gross <agross@xxxxxxxxxx>
To: Bjorn Andersson <andersson@xxxxxxxxxx>
To: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
To: Loic Poulain <loic.poulain@xxxxxxxxxx>
To: Robert Foss <rfoss@xxxxxxxxxx>
To: Rob Herring <robh+dt@xxxxxxxxxx>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@xxxxxxxxxx>
Cc: ~postmarketos/upstreaming@xxxxxxxxxxx
Cc: phone-devel@xxxxxxxxxxxxxxx
Cc: linux-i2c@xxxxxxxxxxxxxxx
Cc: linux-arm-msm@xxxxxxxxxxxxxxx
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx
Signed-off-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
---
Luca Weiss (4):
dt-bindings: i2c: qcom-cci: Document SM6350 compatible
arm64: dts: qcom: sm6350: Add camera clock controller
arm64: dts: qcom: sm6350: Add CCI nodes
arm64: dts: qcom: sm7225-fairphone-fp4: Enable CCI busses
.../devicetree/bindings/i2c/qcom,i2c-cci.yaml | 2 +
arch/arm64/boot/dts/qcom/sm6350.dtsi | 141 +++++++++++++++++++++
arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts | 20 +++
3 files changed, 163 insertions(+)
---
base-commit: 1578f85d549045aac441821064e7953732460e51
change-id: 20221213-sm6350-cci-38baf19ace3b
Best regards,
--
Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
