[PATCH 4/6] drm/msm/hdmi: make hdmi_phy_8960 OF clk provider

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On MSM8960 the HDMI PHY provides the PLL clock to the MMCC. As we are
preparing to convert the MSM8960 to use DT clocks properties (rather
than global clock names), register the OF clock provider.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
 drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c b/drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c
index c3e7ff45e52a..cb35a297afbd 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c
@@ -422,8 +422,7 @@ int msm_hdmi_pll_8960_init(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct hdmi_pll_8960 *pll;
-	struct clk *clk;
-	int i;
+	int i, ret;
 
 	/* sanity check: */
 	for (i = 0; i < (ARRAY_SIZE(freqtbl) - 1); i++)
@@ -443,10 +442,16 @@ int msm_hdmi_pll_8960_init(struct platform_device *pdev)
 	pll->pdev = pdev;
 	pll->clk_hw.init = &pll_init;
 
-	clk = devm_clk_register(dev, &pll->clk_hw);
-	if (IS_ERR(clk)) {
+	ret = devm_clk_hw_register(dev, &pll->clk_hw);
+	if (ret < 0) {
 		DRM_DEV_ERROR(dev, "failed to register pll clock\n");
-		return -EINVAL;
+		return ret;
+	}
+
+	ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get, &pll->clk_hw);
+	if (ret) {
+		DRM_DEV_ERROR(dev, "%s: failed to register clk provider: %d\n", __func__, ret);
+		return ret;
 	}
 
 	return 0;
-- 
2.39.0




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux