On 19/01/2023 11:39, Naman Jain wrote:
Thanks Dmitry for reviewing the patches. Sorry, for replying late on
your email, I wanted to collect all the information, before I do it.
On 1/12/2023 4:49 AM, Dmitry Baryshkov wrote:
On 11/01/2023 10:21, Naman Jain wrote:
Add support in sysfs custom attributes for fields in socinfo version
v2-v6. This is to support SoC based operations in userland scripts
and test scripts. Also, add name mappings for hw-platform type to
make the sysfs information more descriptive.
Please include a patch documenting your additions to
Documentation/ABI/testing/sysfs-devices-soc. Please describe usecases
for new attributes and their applicability to non-Qualcomm boards.
The fields added here, are applicable to Qualcomm boards only. I can
include in the same file sysfs-devices-soc, mentioning the same that it
is Qcom specific, or I can create a new file for this,
sysfs-devices-soc-qcom, however you suggest. Mentioning the use cases,
later in the mail.
So, you are extending the generic SoC interface with the vendor-specific
interfaces. There must be a file describing them in a generic enough way
that other vendors can apply for their boards too.
Note, that /sys/devices/soc applies to SoC level, not the board level.
Generally I think that you should export your data through a more
generic data path, e.g. /sys/firmware.
Note, that testing scripts can access debugfs entries without any issues.
Yes, that is right. Thanks.
Signed-off-by: Naman Jain <quic_namajain@xxxxxxxxxxx>
---
drivers/soc/qcom/socinfo.c | 181 +++++++++++++++++++++++++++++++++++++
1 file changed, 181 insertions(+)
diff --git a/drivers/soc/qcom/socinfo.c b/drivers/soc/qcom/socinfo.c
index 251c0fd94962..ff92064c2246 100644
--- a/drivers/soc/qcom/socinfo.c
+++ b/drivers/soc/qcom/socinfo.c
@@ -41,6 +41,52 @@
*/
#define SMEM_HW_SW_BUILD_ID 137
+enum {
+ HW_PLATFORM_UNKNOWN = 0,
+ HW_PLATFORM_SURF = 1,
+ HW_PLATFORM_FFA = 2,
+ HW_PLATFORM_FLUID = 3,
+ HW_PLATFORM_SVLTE_FFA = 4,
+ HW_PLATFORM_SVLTE_SURF = 5,
+ HW_PLATFORM_MTP_MDM = 7,
+ HW_PLATFORM_MTP = 8,
+ HW_PLATFORM_LIQUID = 9,
+ HW_PLATFORM_DRAGON = 10,
+ HW_PLATFORM_QRD = 11,
+ HW_PLATFORM_HRD = 13,
+ HW_PLATFORM_DTV = 14,
+ HW_PLATFORM_RCM = 21,
+ HW_PLATFORM_STP = 23,
+ HW_PLATFORM_SBC = 24,
+ HW_PLATFORM_HDK = 31,
+ HW_PLATFORM_ATP = 33,
+ HW_PLATFORM_IDP = 34,
+ HW_PLATFORM_INVALID
+};
+
+static const char * const hw_platform[] = {
+ [HW_PLATFORM_UNKNOWN] = "Unknown",
+ [HW_PLATFORM_SURF] = "Surf",
+ [HW_PLATFORM_FFA] = "FFA",
+ [HW_PLATFORM_FLUID] = "Fluid",
+ [HW_PLATFORM_SVLTE_FFA] = "SVLTE_FFA",
+ [HW_PLATFORM_SVLTE_SURF] = "SLVTE_SURF",
+ [HW_PLATFORM_MTP_MDM] = "MDM_MTP_NO_DISPLAY",
+ [HW_PLATFORM_MTP] = "MTP",
+ [HW_PLATFORM_RCM] = "RCM",
+ [HW_PLATFORM_LIQUID] = "Liquid",
+ [HW_PLATFORM_DRAGON] = "Dragon",
+ [HW_PLATFORM_QRD] = "QRD",
+ [HW_PLATFORM_HRD] = "HRD",
+ [HW_PLATFORM_DTV] = "DTV",
+ [HW_PLATFORM_STP] = "STP",
+ [HW_PLATFORM_SBC] = "SBC",
+ [HW_PLATFORM_HDK] = "HDK",
+ [HW_PLATFORM_ATP] = "ATP",
+ [HW_PLATFORM_IDP] = "IDP",
+ [HW_PLATFORM_INVALID] = "Invalid",
+};
This is not a property of the SoC. It is a property of the device. As
such it should not be part of /sys/bus/soc devices.
I understand your point. The Socinfo structure as such on Qualcomm SoC
gives not just SoC related information but also many other info like
serial number, platform subtype etc. Now in order to support the
usecases below, we are proposing sysfs interface extension, as we can't
use debugfs interface in production/end user devices due to debugfs
access restrictions.
"The vendor does it in this way" doesn't give you a right to repurpose
the ABI.
Use cases:
1. In post-boot shell scripts, for various chip specific operations,
that are relevant to that particular chip/board only:
a. Setting kernel parameters using sysfs interfaces etc.
If the parameter is common to all devices of some kind, it should be set
by the driver using the data in the DTS. See, how this is managed for
PHY tunings. You can not expect for the userspace to function in any
particular way. The whole userspace might be a single /bin/bash
executing commands and/or scripts. And still the device should function
_properly_.
b. Enabling particular traces, logs
This should not depend on the device type. If you have something
hw-specific, check the particular device instance rather than checking
the board kind.
c. Changing permissions to certain paths
Excuse me, what paths? Permissions have nothing to do with the board kind.
d. Start a userspace service, and pass custom parameters to it on
the fly
I think this also depends on the hardware availability rather than the
board properties.
e. Set certain device properties using setprop
Android specifics. Please formulate this in a generic way.
f. Miscellaneous things like DCC (Data Capture and Compare Engine)
etc.
Please expand this, you can not expect one to know what is DCC and how
it is used.
2. In userspace services, that depend on SoC information, for its
configuration. Eg: Audio, Connectivity services use these.
This is handled using the device ids, models, etc.. Please see, how this
is handled by other software (hint: ALSA UCM, pulseaudio) instead of
inventing something vendor-specific.
3. adb needs device serial number, sensors need SoC information to
decide its configuration.
Already available via /proc/cmdline thanks for your bootloader.
You can find board description in /sys/firmware/devicetree/base/model
Thanks for pointing this out. This is giving useful information on the
chip and hw_platform, but the problem is that we need other fields as
well, which we may want to use. Hence the ask.
model = "Qualcomm Technologies, Inc. Kalama MTP";
Generally I think that Qualcomm's socinfo is a kind of firmware
interface, so you can probably extend /sys/firmware to provide this kind
of information.
+
#ifdef CONFIG_DEBUG_FS
#define SMEM_IMAGE_VERSION_BLOCKS_COUNT 32
#define SMEM_IMAGE_VERSION_SIZE 4096
@@ -368,6 +414,140 @@ static const struct soc_id soc_id[] = {
{ qcom_board_id(QRU1062) },
};
+/* sysfs attributes */
+#define ATTR_DEFINE(param) \
+ static DEVICE_ATTR(param, 0644, qcom_get_##param, NULL)
+
+/* Version 2 */
+static ssize_t
+qcom_get_raw_id(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return scnprintf(buf, PAGE_SIZE, "%u\n",
+ le32_to_cpu(soc_info->raw_id));
+}
+ATTR_DEFINE(raw_id);
+
+static ssize_t
+qcom_get_raw_version(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return scnprintf(buf, PAGE_SIZE, "%u\n",
+ le32_to_cpu(soc_info->raw_ver));
+}
+ATTR_DEFINE(raw_version);
Why are they raw? can you unraw them?
Whose version and id are these attributes referring to?
So basically, when we call them raw, it essentially means that it is not
parsed as such (different bits may be giving different information, and
the whole value may mean nothing).
*version* refers to the chip version, which can be like v1, v2, v1.1 etc
in real terms. Its raw value is used to map it to one of these versions.
*id* is used as chip ID for QC SoCs for using JTAG. It is different than
the soc_id that we have.
Unraw the values.
+
+/* Version 3 */
+static ssize_t
+qcom_get_hw_platform(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ uint32_t hw_plat = le32_to_cpu(soc_info->hw_plat);
+
+ hw_plat = (hw_plat >= HW_PLATFORM_INVALID) ? HW_PLATFORM_INVALID
: hw_plat;
+ return scnprintf(buf, PAGE_SIZE, "%-.32s\n",
+ hw_platform[hw_plat]);
+}
+ATTR_DEFINE(hw_platform);
+
+/* Version 4 */
+static ssize_t
+qcom_get_platform_version(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return scnprintf(buf, PAGE_SIZE, "%u\n",
+ le32_to_cpu(soc_info->plat_ver));
+}
+ATTR_DEFINE(platform_version);
+
+/* Version 5 */
+static ssize_t
+qcom_get_accessory_chip(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return scnprintf(buf, PAGE_SIZE, "%u\n",
+ le32_to_cpu(soc_info->accessory_chip));
+}
+ATTR_DEFINE(accessory_chip);
If this an _accessory_ chip, there should be a separate soc device
describing it, rather than stuffing information into the soc0.
This is used as a boolean currently to tell us whether SoC has an
accessory chip or not.
SoC doesn't have accessory chip. It the board having the accessory (to
the main SoC) or not.
Also, please do not use 'currently' for the sysfs files. They are ABI.
And changing ABI is a painful process which might be not available at
all. So once you export something through the sysfs, it is written in
stone. Not 'currently, to be changed later'.
+
+/* Version 6 */
+static ssize_t
+qcom_get_platform_subtype_id(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return scnprintf(buf, PAGE_SIZE, "%u\n",
+ le32_to_cpu(soc_info->hw_plat_subtype));
+}
+ATTR_DEFINE(platform_subtype_id);
Again, this is the board property, not an SoC one.
Same justification as one of my previous comments.
Same comment. /sys/bus/soc exists to export information about, you
guess, SoC. If you want to export information about the board, please
find a better way.
--
With best wishes
Dmitry
