Re: [PATCH 5/5] drm/msm/mdp5: Add hardware configuration for msm8x16

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On 03/09/2015 06:41 PM, Stephane Viau wrote:
This change adds the hw configuration for msm8x16 chipsets in
mdp5_cfg module.

Note that only one external display interface is present in this
configuration (DSI) but has not been enabled yet. It will be enabled
once drm/msm driver supports DSI connectors.

Signed-off-by: Stephane Viau <sviau@xxxxxxxxxxxxxx>
---
  drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c | 51 ++++++++++++++++++++++++++++++++-
  1 file changed, 50 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c
index 96ea6dd..9ff7ac1 100644
--- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c
+++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c
@@ -1,5 +1,5 @@
  /*
- * Copyright (c) 2014 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2014-2015 The Linux Foundation. All rights reserved.
   *
   * This program is free software; you can redistribute it and/or modify
   * it under the terms of the GNU General Public License version 2 and
@@ -150,10 +150,59 @@ const struct mdp5_cfg_hw apq8084_config = {
  	.max_clk = 320000000,
  };

+const struct mdp5_cfg_hw msm8x16_config = {
+	.name = "msm8x16",
+	.mdp = {
+		.count = 1,
+		.base = { 0x01000 },
+	},
+	.smp = {
+		.mmb_count = 8,
+		.mmb_size = 8192,
+		.clients = {
+			[SSPP_VIG0] = 1, [SSPP_DMA0] = 4,
+			[SSPP_RGB0] = 7, [SSPP_RGB1] = 8,
+		},
+	},
+	.ctl = {
+		.count = 5,
+		.base = { 0x02000, 0x02200, 0x02400, 0x02600, 0x02800 },
+	},
+	.pipe_vig = {
+		.count = 1,
+		.base = { 0x05000 },
+	},
+	.pipe_rgb = {
+		.count = 2,
+		.base = { 0x15000, 0x17000 },
+	},
+	.pipe_dma = {
+		.count = 1,
+		.base = { 0x25000 },
+	},
+	.lm = {
+		.count = 2, /* LM0 and LM3 */
+		.base = { 0x45000, 0x48000 },
+		.nb_stages = 5,
+	},
+	.dspp = {
+		.count = 1,
+		.base = { 0x55000 },
+
+	},
+	.intf = {
+		.count = 1, /* INTF_1 */
+		.base = { 0x6B800 },

We would need to put the other non-existent INTF_0, INTF_2 and INTF_3 base addresses here too, so that the writes to REG_MDP5_INTF_TIMING_ENGINE_EN in the patch "Make the intf connection in config module" access the correct registers.

Archit

+	},
+	/* TODO enable .intfs[] with [1] = INTF_DSI, once DSI is implemented */
+	.max_clk = 320000000,
+};
+
  static const struct mdp5_cfg_handler cfg_handlers[] = {
  	{ .revision = 0, .config = { .hw = &msm8x74_config } },
  	{ .revision = 2, .config = { .hw = &msm8x74_config } },
  	{ .revision = 3, .config = { .hw = &apq8084_config } },
+	{ .revision = 6, .config = { .hw = &msm8x16_config } },
  };




--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux