[PATCH v2 5/7] arm64: qcom: dts: msm8996 switch from RPM_SMD_BB_CLK1 to RPM_SMD_XO_CLK_SRC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The vendor kernel uses RPM_SMD_XO_CLK_SRC clock as an CXO clock rather
than using the RPM_SMD_BB_CLK1 directly. Follow this example and switch
msm8996.dtsi to use RPM_SMD_XO_CLK_SRC clock instead of RPM_SMB_BB_CLK1.

Fixes: 2b8c9c77c268 ("arm64: dts: qcom: msm8996: convert xo_board to RPM_SMD_BB_CLK1")
Suggested-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index a8544c4158ac..150d13c0f4b8 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -713,7 +713,7 @@ gcc: clock-controller@300000 {
 			#power-domain-cells = <1>;
 			reg = <0x00300000 0x90000>;
 
-			clocks = <&rpmcc RPM_SMD_BB_CLK1>,
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
 				 <&rpmcc RPM_SMD_LN_BB_CLK>,
 				 <&sleep_clk>,
 				 <&pciephy_0>,
@@ -1055,7 +1055,7 @@ dsi0_phy: phy@994400 {
 				#clock-cells = <1>;
 				#phy-cells = <0>;
 
-				clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_BB_CLK1>;
+				clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
 				clock-names = "iface", "ref";
 				status = "disabled";
 			};
@@ -1123,7 +1123,7 @@ dsi1_phy: phy@996400 {
 				#clock-cells = <1>;
 				#phy-cells = <0>;
 
-				clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_BB_CLK1>;
+				clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
 				clock-names = "iface", "ref";
 				status = "disabled";
 			};
@@ -2952,7 +2952,7 @@ kryocc: clock-controller@6400000 {
 			reg = <0x06400000 0x90000>;
 
 			clock-names = "xo", "sys_apcs_aux";
-			clocks = <&rpmcc RPM_SMD_BB_CLK1>, <&apcs_glb>;
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&apcs_glb>;
 
 			#clock-cells = <1>;
 		};
@@ -3071,7 +3071,7 @@ sdhc1: mmc@7464900 {
 			clock-names = "iface", "core", "xo";
 			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
 				<&gcc GCC_SDCC1_APPS_CLK>,
-				<&rpmcc RPM_SMD_BB_CLK1>;
+				<&rpmcc RPM_SMD_XO_CLK_SRC>;
 			resets = <&gcc GCC_SDCC1_BCR>;
 
 			pinctrl-names = "default", "sleep";
@@ -3095,7 +3095,7 @@ sdhc2: mmc@74a4900 {
 			clock-names = "iface", "core", "xo";
 			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
 				<&gcc GCC_SDCC2_APPS_CLK>,
-				<&rpmcc RPM_SMD_BB_CLK1>;
+				<&rpmcc RPM_SMD_XO_CLK_SRC>;
 			resets = <&gcc GCC_SDCC2_BCR>;
 
 			pinctrl-names = "default", "sleep";
@@ -3417,7 +3417,7 @@ adsp_pil: remoteproc@9300000 {
 			interrupt-names = "wdog", "fatal", "ready",
 					  "handover", "stop-ack";
 
-			clocks = <&rpmcc RPM_SMD_BB_CLK1>;
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
 			clock-names = "xo";
 
 			memory-region = <&adsp_mem>;
-- 
2.39.0




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux