Add a new carveout for modem metadata on SC7180 SoCs.
Signed-off-by: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
---
v4:
* Use size/alloc-ranges instead of a specific address [Bjorn]
v2:
* Split dt/bindings per SoC [Krzysztof]
arch/arm64/boot/dts/qcom/sc7180-idp.dts | 8 +++++++-
arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 8 +++++++-
2 files changed, 14 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
index c7a22c7976b7..774f9d45f051 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
@@ -80,6 +80,12 @@
reg = <0x0 0x94400000 0x0 0x200000>;
no-map;
};
+
+ mdata_mem: mpss-metadata {
+ alloc-ranges = <0x0 0xa0000000 0x0 0x20000000>;
+ size = <0x0 0x4000>;
+ no-map;
+ };
};
};
@@ -382,7 +388,7 @@
clock-names = "iface", "bus", "nav", "snoc_axi", "mnoc_axi", "xo";
iommus = <&apps_smmu 0x461 0x0>, <&apps_smmu 0x444 0x3>;
- memory-region = <&mba_mem &mpss_mem>;
+ memory-region = <&mba_mem>, <&mpss_mem>, <&mdata_mem>;
resets = <&aoss_reset AOSS_CC_MSS_RESTART>,
<&pdc_reset PDC_MODEM_SYNC_RESET>;
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index edb56c4d55a2..0dc65cfeba07 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -81,6 +81,12 @@
reg = <0x0 0x94400000 0x0 0x200000>;
no-map;
};
+
+ mdata_mem: mpss-metadata {
+ alloc-ranges = <0x0 0xa0000000 0x0 0x20000000>;
+ size = <0x0 0x4000>;
+ no-map;
+ };
};
aliases {
@@ -865,7 +871,7 @@ hp_i2c: &i2c9 {
clock-names = "iface", "bus", "nav", "snoc_axi", "mnoc_axi", "xo";
iommus = <&apps_smmu 0x461 0x0>, <&apps_smmu 0x444 0x3>;
- memory-region = <&mba_mem &mpss_mem>;
+ memory-region = <&mba_mem>, <&mpss_mem>, <&mdata_mem>;
/* This gets overridden for SKUs with LTE support. */
firmware-name = "qcom/sc7180-trogdor/modem-nolte/mba.mbn",
--
2.17.1
