Use symbolic names for the values inside reg layout arrays. New register
names are added following the PCS register layout that is used by the
particular PHY.
Note: ipq8074 tables appear to use a mixture of v2 and v3 registers.
This might need additional fixes.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 24 +++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index ee35bcd2bdb5..1f022e580407 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -102,23 +102,23 @@ enum qphy_reg_layout {
};
static const unsigned int qmp_v3_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
- [QPHY_SW_RESET] = 0x00,
- [QPHY_START_CTRL] = 0x08,
- [QPHY_PCS_STATUS] = 0x174,
- [QPHY_PCS_POWER_DOWN_CONTROL] = 0x04,
- [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x0d8,
- [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x0dc,
+ [QPHY_SW_RESET] = QPHY_V3_PCS_SW_RESET,
+ [QPHY_START_CTRL] = QPHY_V3_PCS_START_CONTROL,
+ [QPHY_PCS_STATUS] = QPHY_V3_PCS_PCS_STATUS,
+ [QPHY_PCS_POWER_DOWN_CONTROL] = QPHY_V3_PCS_POWER_DOWN_CONTROL,
+ [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = QPHY_V3_PCS_AUTONOMOUS_MODE_CTRL,
+ [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = QPHY_V3_PCS_LFPS_RXTERM_IRQ_CLEAR,
};
static const unsigned int qmp_v4_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
- [QPHY_SW_RESET] = 0x00,
- [QPHY_START_CTRL] = 0x44,
- [QPHY_PCS_STATUS] = 0x14,
- [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
+ [QPHY_SW_RESET] = QPHY_V4_PCS_SW_RESET,
+ [QPHY_START_CTRL] = QPHY_V4_PCS_START_CONTROL,
+ [QPHY_PCS_STATUS] = QPHY_V4_PCS_PCS_STATUS1,
+ [QPHY_PCS_POWER_DOWN_CONTROL] = QPHY_V4_PCS_POWER_DOWN_CONTROL,
/* In PCS_USB */
- [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x008,
- [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x014,
+ [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = QPHY_V4_PCS_USB3_AUTONOMOUS_MODE_CTRL,
+ [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = QPHY_V4_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR,
};
static const struct qmp_phy_init_tbl qmp_v3_usb3_serdes_tbl[] = {
--
2.39.0
