Add ARM common idle states device bindings for cpuidle support for APQ
8084.
Support standby and standalone power collapse (power down that does not
affect any SoC idle states) for each cpu.
Cc: Kumar Gala <galak@xxxxxxxxxxxxxx>
Signed-off-by: Lina Iyer <lina.iyer@xxxxxxxxxx>
Reviewed-by: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
---
arch/arm/boot/dts/qcom-apq8084.dtsi | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi
index 71182bf..a3c24ff 100644
--- a/arch/arm/boot/dts/qcom-apq8084.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8084.dtsi
@@ -22,6 +22,7 @@
next-level-cache = <&L2>;
qcom,acc = <&acc0>;
qcom,saw = <&saw0>;
+ cpu-idle-states = <&CPU_STBY &CPU_SPC>;
};
cpu@1 {
@@ -32,6 +33,7 @@
next-level-cache = <&L2>;
qcom,acc = <&acc1>;
qcom,saw = <&saw1>;
+ cpu-idle-states = <&CPU_STBY &CPU_SPC>;
};
cpu@2 {
@@ -42,6 +44,7 @@
next-level-cache = <&L2>;
qcom,acc = <&acc2>;
qcom,saw = <&saw2>;
+ cpu-idle-states = <&CPU_STBY &CPU_SPC>;
};
cpu@3 {
@@ -52,6 +55,7 @@
next-level-cache = <&L2>;
qcom,acc = <&acc3>;
qcom,saw = <&saw3>;
+ cpu-idle-states = <&CPU_STBY &CPU_SPC>;
};
L2: l2-cache {
@@ -59,6 +63,24 @@
cache-level = <2>;
qcom,saw = <&saw_l2>;
};
+
+ idle-states {
+ CPU_STBY: standby {
+ compatible = "qcom,idle-state-stby",
+ "arm,idle-state";
+ entry-latency-us = <1>;
+ exit-latency-us = <1>;
+ min-residency-us = <2>;
+ };
+
+ CPU_SPC: spc {
+ compatible = "qcom,idle-state-spc",
+ "arm,idle-state";
+ entry-latency-us = <150>;
+ exit-latency-us = <200>;
+ min-residency-us = <2000>;
+ };
+ };
};
cpu-pmu {
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
