Enable UFS host controller and PHY node on SM8550 MTP board.
Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
---
Changes since v1:
* moved status property last, like Konrad suggested
arch/arm64/boot/dts/qcom/sm8550-mtp.dts | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
index 8586e16d6079..81fcbdc6bdc4 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
@@ -399,6 +399,25 @@ &uart7 {
status = "okay";
};
+&ufs_mem_hc {
+ reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
+ vcc-supply = <&vreg_l17b_2p5>;
+ vcc-max-microamp = <1300000>;
+ vccq-supply = <&vreg_l1g_1p2>;
+ vccq-max-microamp = <1200000>;
+ vccq2-supply = <&vreg_l3g_1p2>;
+ vccq2-max-microamp = <100>;
+
+ status = "okay";
+};
+
+&ufs_mem_phy {
+ vdda-phy-supply = <&vreg_l1d_0p88>;
+ vdda-pll-supply = <&vreg_l3e_1p2>;
+
+ status = "okay";
+};
+
&xo_board {
clock-frequency = <76800000>;
};
--
2.34.1
