Running GCC_USB30_*_MASTER_CLK at 200MHz requires CX at nominal level,
not doing so results in occasional lockups. This was previously hidden
by the fact that the display stack incorrectly voted for CX (instead of
MMCX).
Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform")
Signed-off-by: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index 2ed17baf50d3..4f4353f84cba 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -2265,6 +2265,7 @@ usb_0: usb@a6f8800 {
"ss_phy_irq";
power-domains = <&gcc USB30_PRIM_GDSC>;
+ required-opps = <&rpmhpd_opp_nom>;
resets = <&gcc GCC_USB30_PRIM_BCR>;
@@ -2319,6 +2320,7 @@ usb_1: usb@a8f8800 {
"ss_phy_irq";
power-domains = <&gcc USB30_SEC_GDSC>;
+ required-opps = <&rpmhpd_opp_nom>;
resets = <&gcc GCC_USB30_SEC_BCR>;
--
2.37.3
