Re: [PATCH v6 4/6] ARM: dts: qcom: fix various wrong definition for kpss-gcc node

[Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>]

On 10/01/2023 20:32, Christian Marangi wrote:
> Fix dtbs_check warning now that we have a correct kpss-gcc yaml
> schema. Add additional qcom,kpss-gcc compatible to differentiate
> devices where kpss-gcc should provide a clk and where kpss-gcc should
> just provide the registers and the syscon phandle.
> Add missing #clock-cells and remove useless clock-output-names for
> ipq806x.
> Add missing bindings for msm8960 and apq8064 kpss-gcc node.
>
> Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
> ---
>   arch/arm/boot/dts/qcom-apq8064.dtsi | 5 ++++-
>   arch/arm/boot/dts/qcom-ipq8064.dtsi | 4 ++--
>   arch/arm/boot/dts/qcom-mdm9615.dtsi | 2 +-
>   arch/arm/boot/dts/qcom-msm8660.dtsi | 2 +-
>   arch/arm/boot/dts/qcom-msm8960.dtsi | 5 ++++-
>   5 files changed, 12 insertions(+), 6 deletions(-)

Please split this commit into two commits:
- one adding per-SoC compatibles. Mention that they are not (yet) used 
by the driver, but can serve further customisation.

- another one adding and fixing clock configuration. My notes to patch 
5/6 applies here too.

> diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
> index 1f3e0aa9ab0c..1e68b42acb91 100644
> --- a/arch/arm/boot/dts/qcom-apq8064.dtsi
> +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
> @@ -880,8 +880,11 @@ mmcc: clock-controller@4000000 {
>   		};
>   
>   		l2cc: clock-controller@2011000 {
> -			compatible = "qcom,kpss-gcc", "syscon";
> +			compatible = "qcom,kpss-gcc-apq8064", "qcom,kpss-gcc", "syscon";
>   			reg = <0x2011000 0x1000>;
> +			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
> +			clock-names = "pll8_vote", "pxo";
> +			#clock-cells = <0>;
>   		};
>   
>   		rpm: rpm@108000 {
> diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
> index 7e784b0995da..de87fcaaa836 100644
> --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
> +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
> @@ -570,11 +570,11 @@ IRQ_TYPE_EDGE_RISING)>,
>   		};
>   
>   		l2cc: clock-controller@2011000 {
> -			compatible = "qcom,kpss-gcc", "syscon";
> +			compatible = "qcom,kpss-gcc-ipq8064", "qcom,kpss-gcc", "syscon";
>   			reg = <0x02011000 0x1000>;
>   			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
>   			clock-names = "pll8_vote", "pxo";
> -			clock-output-names = "acpu_l2_aux";
> +			#clock-cells = <0>;
>   		};
>   
>   		acc0: clock-controller@2088000 {
> diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi
> index b0fe1d95d88f..61dfec3b9037 100644
> --- a/arch/arm/boot/dts/qcom-mdm9615.dtsi
> +++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi
> @@ -116,7 +116,7 @@ lcc: clock-controller@28000000 {
>   		};
>   
>   		l2cc: clock-controller@2011000 {
> -			compatible = "qcom,kpss-gcc", "syscon";
> +			compatible = "qcom,kpss-gcc-mdm9615", "qcom,kpss-gcc", "syscon";
>   			reg = <0x02011000 0x1000>;
>   		};
>   
> diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
> index 86f76d0feff4..f601b40ebcf4 100644
> --- a/arch/arm/boot/dts/qcom-msm8660.dtsi
> +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
> @@ -473,7 +473,7 @@ pm8058_led133: led@133 {
>   		};
>   
>   		l2cc: clock-controller@2082000 {
> -			compatible = "qcom,kpss-gcc", "syscon";
> +			compatible = "qcom,kpss-gcc-msm8660", "qcom,kpss-gcc", "syscon";
>   			reg = <0x02082000 0x1000>;
>   		};
>   
> diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi
> index 7debf9db7cb1..3bd07cac315b 100644
> --- a/arch/arm/boot/dts/qcom-msm8960.dtsi
> +++ b/arch/arm/boot/dts/qcom-msm8960.dtsi
> @@ -183,8 +183,11 @@ clock-controller@4000000 {
>   		};
>   
>   		l2cc: clock-controller@2011000 {
> -			compatible = "qcom,kpss-gcc", "syscon";
> +			compatible = "qcom,kpss-gcc-msm8960", "qcom,kpss-gcc", "syscon";
>   			reg = <0x2011000 0x1000>;
> +			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
> +			clock-names = "pll8_vote", "pxo";
> +			#clock-cells = <0>;
>   		};
>   
>   		rpm: rpm@108000 {

--
With best wishes
Dmitry