Re: [PATCH 05/13] clk: qcom: cpu-8996: skip ACD init if the setup is valid

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 11.01.2023 20:19, Dmitry Baryshkov wrote:
> Check whether L2 registers contain correct values and skip programming
> if they are valid. This follows the code present downstream.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> ---
Once again, my random local msm-3.18 doesn't do this, can you show
me the downstream source for this?

Konrad
>  drivers/clk/qcom/clk-cpu-8996.c | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/drivers/clk/qcom/clk-cpu-8996.c b/drivers/clk/qcom/clk-cpu-8996.c
> index 0e0c00d44c6f..7e5246ca7e7f 100644
> --- a/drivers/clk/qcom/clk-cpu-8996.c
> +++ b/drivers/clk/qcom/clk-cpu-8996.c
> @@ -472,10 +472,15 @@ static void __iomem *base;
>  static void qcom_cpu_clk_msm8996_acd_init(void __iomem *base)
>  {
>  	u64 hwid;
> +	u32 val;
>  	unsigned long flags;
>  
>  	spin_lock_irqsave(&qcom_clk_acd_lock, flags);
>  
> +	val = kryo_l2_get_indirect_reg(L2ACDTD_REG);
> +	if (val == 0x00006a11)
> +		goto out;
> +
>  	hwid = read_cpuid_mpidr() & CPU_AFINITY_MASK;
>  
>  	kryo_l2_set_indirect_reg(L2ACDTD_REG, 0x00006a11);
> @@ -492,6 +497,7 @@ static void qcom_cpu_clk_msm8996_acd_init(void __iomem *base)
>  		writel(0xf, base + PERFCL_REG_OFFSET + SSSCTL_OFFSET);
>  	}
>  
> +out:
>  	spin_unlock_irqrestore(&qcom_clk_acd_lock, flags);
>  }
>  



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux