MDP block is actually contained inside the MDSS block. For some chipsets, the base address of the MDP registers is different from the current (assumed) 0x100 offset. Like CTL and LM blocks, this changes introduce a dynamic offset for the MDP instance, which can be found out at runtime, once the MDSS HW version is read. Signed-off-by: Stephane Viau <sviau@xxxxxxxxxxxxxx> --- rnndb/mdp/mdp5.xml | 123 +++++++++++++++++++++++++++++------------------------ 1 file changed, 67 insertions(+), 56 deletions(-) diff --git a/rnndb/mdp/mdp5.xml b/rnndb/mdp/mdp5.xml index db2e15c..aedaa7c 100644 --- a/rnndb/mdp/mdp5.xml +++ b/rnndb/mdp/mdp5.xml @@ -9,6 +9,22 @@ xsi:schemaLocation="http://nouveau.freedesktop.org/ rules-ng.xsd"> <domain name="VBIF" width="32"> </domain> +<domain name="MDSS" width="32"> + <reg32 offset="0x00000" name="HW_VERSION"> + <bitfield name="STEP" low="0" high="15" type="uint"/> + <bitfield name="MINOR" low="16" high="27" type="uint"/> + <bitfield name="MAJOR" low="28" high="31" type="uint"/> + </reg32> + + <reg32 offset="0x00010" name="HW_INTR_STATUS"> + <bitfield name="INTR_MDP" pos="0" type="boolean"/> + <bitfield name="INTR_DSI0" pos="4" type="boolean"/> + <bitfield name="INTR_DSI1" pos="5" type="boolean"/> + <bitfield name="INTR_HDMI" pos="8" type="boolean"/> + <bitfield name="INTR_EDP" pos="12" type="boolean"/> + </reg32> +</domain> + <domain name="MDP5" width="32"> <enum name="mdp5_intf_type"> @@ -149,64 +165,59 @@ xsi:schemaLocation="http://nouveau.freedesktop.org/ rules-ng.xsd"> <bitfield name="CLIENT2" low="16" high="23" type="mdp5_client_id"/> </bitset> - <reg32 offset="0x00000" name="HW_VERSION"/> - <reg32 offset="0x00010" name="HW_INTR_STATUS"> - <bitfield name="INTR_MDP" pos="0" type="boolean"/> - <bitfield name="INTR_DSI0" pos="4" type="boolean"/> - <bitfield name="INTR_DSI1" pos="5" type="boolean"/> - <bitfield name="INTR_HDMI" pos="8" type="boolean"/> - <bitfield name="INTR_EDP" pos="12" type="boolean"/> - </reg32> - - <reg32 offset="0x00100" name="MDP_VERSION"> - <bitfield name="MINOR" low="16" high="23" type="uint"/> - <bitfield name="MAJOR" low="28" high="31" type="uint"/> - </reg32> + <!-- Even though there is 1 MDP, length=2 to force dynamic offset usage --> + <array doffsets="mdp5_cfg->mdp.base[0]" name="MDP" length="2" stride="0x1000"> + <reg32 offset="0x00000" name="HW_VERSION"> + <bitfield name="STEP" low="0" high="15" type="uint"/> + <bitfield name="MINOR" low="16" high="27" type="uint"/> + <bitfield name="MAJOR" low="28" high="31" type="uint"/> + </reg32> - <reg32 offset="0x00104" name="DISP_INTF_SEL"> - <bitfield name="INTF0" low="0" high="7" type="mdp5_intf_type"/> - <bitfield name="INTF1" low="8" high="15" type="mdp5_intf_type"/> - <bitfield name="INTF2" low="16" high="23" type="mdp5_intf_type"/> - <bitfield name="INTF3" low="24" high="31" type="mdp5_intf_type"/> - </reg32> - <reg32 offset="0x00110" name="INTR_EN" type="MDP5_IRQ"/> - <reg32 offset="0x00114" name="INTR_STATUS" type="MDP5_IRQ"/> - <reg32 offset="0x00118" name="INTR_CLEAR" type="MDP5_IRQ"/> - <reg32 offset="0x0011C" name="HIST_INTR_EN"/> - <reg32 offset="0x00120" name="HIST_INTR_STATUS"/> - <reg32 offset="0x00124" name="HIST_INTR_CLEAR"/> - <reg32 offset="0x00128" name="SPARE_0"> - <bitfield name="SPLIT_DPL_SINGLE_FLUSH_EN" pos="0"/> - </reg32> + <reg32 offset="0x00004" name="DISP_INTF_SEL"> + <bitfield name="INTF0" low="0" high="7" type="mdp5_intf_type"/> + <bitfield name="INTF1" low="8" high="15" type="mdp5_intf_type"/> + <bitfield name="INTF2" low="16" high="23" type="mdp5_intf_type"/> + <bitfield name="INTF3" low="24" high="31" type="mdp5_intf_type"/> + </reg32> + <reg32 offset="0x00010" name="INTR_EN" type="MDP5_IRQ"/> + <reg32 offset="0x00014" name="INTR_STATUS" type="MDP5_IRQ"/> + <reg32 offset="0x00018" name="INTR_CLEAR" type="MDP5_IRQ"/> + <reg32 offset="0x0001C" name="HIST_INTR_EN"/> + <reg32 offset="0x00020" name="HIST_INTR_STATUS"/> + <reg32 offset="0x00024" name="HIST_INTR_CLEAR"/> + <reg32 offset="0x00028" name="SPARE_0"> + <bitfield name="SPLIT_DPL_SINGLE_FLUSH_EN" pos="0"/> + </reg32> - <array offset="0x00180" name="SMP_ALLOC_W" length="8" stride="4"> - <reg32 offset="0" name="REG" type="mdp5_smp_alloc"/> - </array> - <array offset="0x00230" name="SMP_ALLOC_R" length="8" stride="4"> - <reg32 offset="0" name="REG" type="mdp5_smp_alloc"/> - </array> + <array offset="0x00080" name="SMP_ALLOC_W" length="8" stride="4"> + <reg32 offset="0" name="REG" type="mdp5_smp_alloc"/> + </array> + <array offset="0x00130" name="SMP_ALLOC_R" length="8" stride="4"> + <reg32 offset="0" name="REG" type="mdp5_smp_alloc"/> + </array> - <enum name="mdp5_igc_type"> - <value name="IGC_VIG" value="0"/> <!-- 0x300 --> - <value name="IGC_RGB" value="1"/> <!-- 0x310 --> - <value name="IGC_DMA" value="2"/> <!-- 0x320 --> - <value name="IGC_DSPP" value="3"/> <!-- 0x400 --> - </enum> - <array offsets="0x00300,0x00310,0x00320,0x00400" name="IGC" length="3" stride="0x10" index="mdp5_igc_type"> - <array offset="0x00" name="LUT" length="3" stride="4"> - <reg32 offset="0" name="REG"> - <bitfield name="VAL" low="0" high="11"/> - <bitfield name="INDEX_UPDATE" pos="25" type="boolean"/> - <!-- - not sure about these: - /* INDEX_UPDATE */ - data = (1 << 25) | (((~(1 << blk_idx)) & 0x7) << 28); - MDSS_MDP_REG_WRITE(offset, (cfg->c0_c1_data[0] & 0xFFF) | data); - --> - <bitfield name="DISABLE_PIPE_0" pos="28" type="boolean"/> - <bitfield name="DISABLE_PIPE_1" pos="29" type="boolean"/> - <bitfield name="DISABLE_PIPE_2" pos="30" type="boolean"/> - </reg32> + <enum name="mdp5_igc_type"> + <value name="IGC_VIG" value="0"/> <!-- 0x200 --> + <value name="IGC_RGB" value="1"/> <!-- 0x210 --> + <value name="IGC_DMA" value="2"/> <!-- 0x220 --> + <value name="IGC_DSPP" value="3"/> <!-- 0x300 --> + </enum> + <array offsets="0x00200,0x00210,0x00220,0x00300" name="IGC" length="3" stride="0x10" index="mdp5_igc_type"> + <array offset="0x00" name="LUT" length="3" stride="4"> + <reg32 offset="0" name="REG"> + <bitfield name="VAL" low="0" high="11"/> + <bitfield name="INDEX_UPDATE" pos="25" type="boolean"/> + <!-- + not sure about these: + /* INDEX_UPDATE */ + data = (1 << 25) | (((~(1 << blk_idx)) & 0x7) << 28); + MDSS_MDP_REG_WRITE(offset, (cfg->c0_c1_data[0] & 0xFFF) | data); + --> + <bitfield name="DISABLE_PIPE_0" pos="28" type="boolean"/> + <bitfield name="DISABLE_PIPE_1" pos="29" type="boolean"/> + <bitfield name="DISABLE_PIPE_2" pos="30" type="boolean"/> + </reg32> + </array> </array> </array> @@ -224,7 +235,7 @@ xsi:schemaLocation="http://nouveau.freedesktop.org/ rules-ng.xsd"> <bitfield name="INTF2_TG_SYNC" pos="8" type="boolean"/> </reg32> <!-- check length/index.. --> - <array doffsets="mdp5_cfg->ctl.base[0],mdp5_cfg->ctl.base[1],mdp5_cfg->ctl.base[2],mdp5_cfg->ctl.base[3],mdp5_cfg->ctl.base[4]" name="CTL" length="5" stride="0x400"> + <array doffsets="mdp5_cfg->ctl.base[0],mdp5_cfg->ctl.base[1],mdp5_cfg->ctl.base[2],mdp5_cfg->ctl.base[3],mdp5_cfg->ctl.base[4]" name="CTL" length="5" stride="0x400"> <array offsets="0x000,0x004,0x008,0x00C,0x010,0x024" name="LAYER" length="6" stride="4"> <reg32 offset="0" name="REG"> <bitfield name="VIG0" low="0" high="2" type="mdp_mixer_stage_id"/> -- Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
