Re: [v3,3/7] drm/bridge_connector: rely on drm_kms_helper_poll_* for HPD enablement

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 02.11.2022 19:07, Dmitry Baryshkov wrote:
> Use drm_connector's helpers enable_hpd and disable_hpd to enable and
> disable HPD automatically by the means of drm_kms_helper_poll_*
> functions. As the drm_bridge_connector_enable_hpd() and
> drm_bridge_connector_disable_hpd() functions are now unused, replace
> them with stubs to ease driver migration.
>
> Enabling the HPD from drm_bridge_connector_init() can happen too early,
> before the driver is prepared to handle HPD events. As the
> drm_bridge_connector_enable_hpd() is empty anyway, drop this call
> anyway.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> ---

This patch, merged to recent linux-next as commit 92d755d8f13b 
("drm/bridge_connector: rely on drm_kms_helper_poll_* for HPD 
enablement"), triggers the following warning on all my Amlogic Meson 
based boards:

------------[ cut here ]------------
Hot plug detection already enabled
WARNING: CPU: 2 PID: 285 at drivers/gpu/drm/drm_bridge.c:1257 
drm_bridge_hpd_enable+0x90/0xa0
Modules linked in: snd_soc_meson_axg_frddr snd_soc_meson_axg_fifo 
dwmac_generic panfrost(+) reset_meson_audio_arb(+) drm_shmem_helper 
meson_dw_hdmi(+) dw_hdmi rc_odroid drm_display_helper meson_ir(+) 
gpu_sched meson_rng rng_core meson_gxbb_wdt crct10dif_ce dwmac_meson8b 
stmmac_platform snd_soc_meson_axg_sound_card snd_soc_meson_card_utils 
mdio_mux_meson_g12a stmmac meson_drm pwm_meson pcs_xpcs meson_canvas 
snd_soc_meson_axg_tdm_interface rtc_meson_vrtc 
snd_soc_meson_axg_tdm_formatter nvmem_meson_efuse display_connector
CPU: 2 PID: 285 Comm: systemd-udevd Not tainted 6.1.0-rc6+ #13236
Hardware name: Hardkernel ODROID-C4 (DT)
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : drm_bridge_hpd_enable+0x90/0xa0
lr : drm_bridge_hpd_enable+0x90/0xa0
...
Call trace:
  drm_bridge_hpd_enable+0x90/0xa0
  _drm_bridge_connector_enable_hpd+0x24/0x34
  drm_kms_helper_poll_enable.part.0+0x50/0xd0
  drm_helper_probe_single_connector_modes+0x400/0x530
  drm_client_modeset_probe+0x1ec/0xba0
  __drm_fb_helper_initial_config_and_unlock+0x4c/0x630
  drm_fb_helper_initial_config+0x50/0x60
  drm_fbdev_client_hotplug+0xc4/0x150
  drm_fbdev_generic_setup+0x88/0x150
  meson_drv_bind_master+0x3d4/0x4a0 [meson_drm]
  meson_drv_bind+0x14/0x20 [meson_drm]
  try_to_bring_up_aggregate_device+0x164/0x1d0
  __component_add+0xa8/0x174
  component_add+0x14/0x20
  meson_dw_hdmi_probe+0x1c/0x30 [meson_dw_hdmi]
  platform_probe+0x68/0xe0
  really_probe+0xbc/0x2e0
  __driver_probe_device+0x78/0xe0
  driver_probe_device+0x3c/0x160
  __driver_attach+0x88/0x1a0
  bus_for_each_dev+0x70/0xd0
  driver_attach+0x24/0x30
  bus_add_driver+0x154/0x204
  driver_register+0x78/0x130
  __platform_driver_register+0x28/0x34
  meson_dw_hdmi_platform_driver_init+0x24/0x1000 [meson_dw_hdmi]
  do_one_initcall+0x74/0x400
  do_init_module+0x48/0x1d4
  load_module+0x1818/0x1de0
  __do_sys_finit_module+0xc0/0x114
  __arm64_sys_finit_module+0x20/0x30
  invoke_syscall+0x48/0x114
  el0_svc_common.constprop.0+0x60/0x11c
  do_el0_svc_compat+0x1c/0x40
  el0_svc_compat+0x48/0xc0
  el0t_32_sync_handler+0x90/0x140
  el0t_32_sync+0x190/0x194
irq event stamp: 17422
hardirqs last  enabled at (17421): [<ffff800009196058>] 
__schedule+0x998/0xa14
hardirqs last disabled at (17422): [<ffff80000918e4a4>] el1_dbg+0x24/0x90
softirqs last  enabled at (17404): [<ffff80000801046c>] _stext+0x46c/0x5d8
softirqs last disabled at (17383): [<ffff8000080166d0>] 
____do_softirq+0x10/0x20
---[ end trace 0000000000000000 ]---

I looks that this change requires some additional changes/fixes in the 
drivers/gpu/drm/meson/meson_dw_hdmi.c


>   drivers/gpu/drm/drm_bridge_connector.c | 18 +++++++++++++-----
>   1 file changed, 13 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_bridge_connector.c b/drivers/gpu/drm/drm_bridge_connector.c
> index 1c7d936523df..0e13bc87a6ac 100644
> --- a/drivers/gpu/drm/drm_bridge_connector.c
> +++ b/drivers/gpu/drm/drm_bridge_connector.c
> @@ -136,6 +136,11 @@ static void drm_bridge_connector_hpd_cb(void *cb_data,
>    * This is typically used by display drivers in their resume handler.
>    */
>   void drm_bridge_connector_enable_hpd(struct drm_connector *connector)
> +{
> +}
> +EXPORT_SYMBOL_GPL(drm_bridge_connector_enable_hpd);
> +
> +static void _drm_bridge_connector_enable_hpd(struct drm_connector *connector)
>   {
>   	struct drm_bridge_connector *bridge_connector =
>   		to_drm_bridge_connector(connector);
> @@ -145,7 +150,6 @@ void drm_bridge_connector_enable_hpd(struct drm_connector *connector)
>   		drm_bridge_hpd_enable(hpd, drm_bridge_connector_hpd_cb,
>   				      bridge_connector);
>   }
> -EXPORT_SYMBOL_GPL(drm_bridge_connector_enable_hpd);
>   
>   /**
>    * drm_bridge_connector_disable_hpd - Disable hot-plug detection for the
> @@ -156,6 +160,11 @@ EXPORT_SYMBOL_GPL(drm_bridge_connector_enable_hpd);
>    * This is typically used by display drivers in their suspend handler.
>    */
>   void drm_bridge_connector_disable_hpd(struct drm_connector *connector)
> +{
> +}
> +EXPORT_SYMBOL_GPL(drm_bridge_connector_disable_hpd);
> +
> +static void _drm_bridge_connector_disable_hpd(struct drm_connector *connector)
>   {
>   	struct drm_bridge_connector *bridge_connector =
>   		to_drm_bridge_connector(connector);
> @@ -164,7 +173,6 @@ void drm_bridge_connector_disable_hpd(struct drm_connector *connector)
>   	if (hpd)
>   		drm_bridge_hpd_disable(hpd);
>   }
> -EXPORT_SYMBOL_GPL(drm_bridge_connector_disable_hpd);
>   
>   /* -----------------------------------------------------------------------------
>    * Bridge Connector Functions
> @@ -305,6 +313,8 @@ static int drm_bridge_connector_get_modes(struct drm_connector *connector)
>   static const struct drm_connector_helper_funcs drm_bridge_connector_helper_funcs = {
>   	.get_modes = drm_bridge_connector_get_modes,
>   	/* No need for .mode_valid(), the bridges are checked by the core. */
> +	.enable_hpd = _drm_bridge_connector_enable_hpd,
> +	.disable_hpd = _drm_bridge_connector_disable_hpd,
>   };
>   
>   /* -----------------------------------------------------------------------------
> @@ -387,10 +397,8 @@ struct drm_connector *drm_bridge_connector_init(struct drm_device *drm,
>   				    connector_type, ddc);
>   	drm_connector_helper_add(connector, &drm_bridge_connector_helper_funcs);
>   
> -	if (bridge_connector->bridge_hpd) {
> +	if (bridge_connector->bridge_hpd)
>   		connector->polled = DRM_CONNECTOR_POLL_HPD;
> -		drm_bridge_connector_enable_hpd(connector);
> -	}
>   	else if (bridge_connector->bridge_detect)
>   		connector->polled = DRM_CONNECTOR_POLL_CONNECT
>   				  | DRM_CONNECTOR_POLL_DISCONNECT;

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux