The SA8540P PMICs are named PMM8540. Rename the devicetree source labels
to reflect this.
Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sa8540p-pmics.dtsi | 24 ++++++++++-----------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sa8540p-pmics.dtsi b/arch/arm64/boot/dts/qcom/sa8540p-pmics.dtsi
index 8c393f0bd6a8..1221be89b3de 100644
--- a/arch/arm64/boot/dts/qcom/sa8540p-pmics.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8540p-pmics.dtsi
@@ -8,7 +8,7 @@
#include <dt-bindings/spmi/spmi.h>
&spmi_bus {
- pm8450a: pmic@0 {
+ pmm8540a: pmic@0 {
compatible = "qcom,pm8150", "qcom,spmi-pmic";
reg = <0x0 SPMI_USID>;
#address-cells = <1>;
@@ -22,62 +22,62 @@ rtc@6000 {
wakeup-source;
};
- pm8450a_gpios: gpio@c000 {
+ pmm8540a_gpios: gpio@c000 {
compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
- gpio-ranges = <&pm8450a_gpios 0 0 10>;
+ gpio-ranges = <&pmm8540a_gpios 0 0 10>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
- pm8450c: pmic@4 {
+ pmm8540c: pmic@4 {
compatible = "qcom,pm8150", "qcom,spmi-pmic";
reg = <0x4 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
- pm8450c_gpios: gpio@c000 {
+ pmm8540c_gpios: gpio@c000 {
compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
- gpio-ranges = <&pm8450c_gpios 0 0 10>;
+ gpio-ranges = <&pmm8540c_gpios 0 0 10>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
- pm8450e: pmic@8 {
+ pmm8540e: pmic@8 {
compatible = "qcom,pm8150", "qcom,spmi-pmic";
reg = <0x8 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
- pm8450e_gpios: gpio@c000 {
+ pmm8540e_gpios: gpio@c000 {
compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
- gpio-ranges = <&pm8450e_gpios 0 0 10>;
+ gpio-ranges = <&pmm8540e_gpios 0 0 10>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
- pm8450g: pmic@c {
+ pmm8540g: pmic@c {
compatible = "qcom,pm8150", "qcom,spmi-pmic";
reg = <0xc SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
- pm8450g_gpios: gpio@c000 {
+ pmm8540g_gpios: gpio@c000 {
compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
- gpio-ranges = <&pm8450g_gpios 0 0 10>;
+ gpio-ranges = <&pmm8540g_gpios 0 0 10>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
--
2.38.2
