On Mon, 09 Jan 2023 18:44:54 +0100, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
>
> Add DT bindings for the GCC clock on SA8775P platforms. Add relevant
> DT include definitions as well.
>
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
> ---
> .../bindings/clock/qcom,gcc-sa8775p.yaml | 77 +++++
> include/dt-bindings/clock/qcom,gcc-sa8775p.h | 320 ++++++++++++++++++
> 2 files changed, 397 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-sa8775p.yaml
> create mode 100644 include/dt-bindings/clock/qcom,gcc-sa8775p.h
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/qcom,gcc-sa8775p.example.dtb: clock-controller@100000: clocks: [[4294967295, 0], [4294967295, 0, 0, 0, 0, 0, 0, 0, 0], [4294967295, 0, 0, 0, 0]] is too short
From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/qcom,gcc-sa8775p.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/qcom,gcc-sa8775p.example.dtb: clock-controller@100000: Unevaluated properties are not allowed ('clocks' was unexpected)
From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/qcom,gcc-sa8775p.yaml
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230109174511.1740856-2-brgl@xxxxxxxx
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
