Re: [PATCH v2 1/4] dt-bindings: display/msm: add core clock to the mdss bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 09/01/2023 12:35, Krzysztof Kozlowski wrote:
On 09/01/2023 01:52, Dmitry Baryshkov wrote:
Add (optional) core clock to the mdss bindings to let the MDSS driver
access harware registers before MDP driver probes.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
  .../bindings/display/msm/qcom,mdss.yaml       | 34 ++++++++++++++-----
  1 file changed, 26 insertions(+), 8 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml
index ba0460268731..0647fc5a7d94 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml
@@ -45,17 +45,11 @@ properties:
clocks:
      minItems: 1
-    items:
-      - description: Display abh clock
-      - description: Display axi clock

Not related to this patch, but it is a bit surprising to see AXI clock
optional.

Hmm, There is one defined downstream. Probably we should fix that (but yes, it's a separate issue).

-      - description: Display vsync clock
+    maxItems: 4
clock-names:
      minItems: 1
-    items:
-      - const: iface
-      - const: bus
-      - const: vsync
+    maxItems: 4
"#address-cells":
      const: 1
@@ -69,6 +63,30 @@ properties:
      items:
        - description: MDSS_CORE reset
+oneOf:
+  - properties:
+      clocks:
+        minItems: 3
+        maxItems: 4
+
+      clock-names:
+        minItems: 3
+        items:
+          - const: iface
+          - const: bus

BTW, sc7180-mdss uses here ahb name and calls it "AHB clock from dispcc".

SM8250 won't match here either. Maybe this should be reworked to specify
limits here but not the names and actual clocks? IOW, drop entire oneOf?

SC7180 and SM8250 use platform-specific bindings (qcom,sc7180-mdss.yaml and qcom,sm8250-mdss.yaml). This file is used only for older platforms (msm8916, msm8996, etc).


There were a lot, a lot of changes to MDSS/DPU bindings recently, so I
am really loosing track what is done where and when.

There are also few separate patchsets from you on the lists. Could they
be combined into one cleanup?

Ack, I'll merge them into a single patchset.

I understand that sometimes new cleanup is needed after old cleanup
finished (I had the same with pinctrl), so it is not a complain.

Another problem (and this time I complain) is that several of your
patchsets were sent, discussed and then without any notice applied. No
message that a patchset was applied to some tree. Look:

https://lore.kernel.org/all/20221124001708.25720-2-a39.skl@xxxxxxxxx/
https://lore.kernel.org/all/09ed16e1-4af2-8fce-dab4-f6c0f09e688c@xxxxxxxxxx/

Nothing. Silent application. If you are the maintainer which picks up
the patch, please always, always send message that they are applied.
Patchwork does it automatically, b4 can do it easily as well. If you use
other tools - use other tools for sending it. Otherwise things are
discussed on mailing lists, receive several comments and there is never
a resubmit but instead they show in the tree.

Unfortunately freedreno uses patchwork-fdo, which doesn't send notifications. And the fdo fork is not supported by b4. I checked what would be necessary to enable support in b4. Unfortunately several API changes would be necessary. So this is a long process. But we are open to any suggestions on how to improve the process. Currently all three maintainers (Rob, Abhinav and me) keep the patch status in the patchwork, but that's all.

--
With best wishes
Dmitry




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux