[PATCH v3 3/7] dt-bindings: display/msm: document MDSS on SM8550

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Document the MDSS hardware found on the Qualcomm SM8550 platform.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
---
 .../bindings/display/msm/qcom,sm8550-mdss.yaml     | 331 +++++++++++++++++++++
 1 file changed, 331 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml
new file mode 100644
index 000000000000..6286e08bb941
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml
@@ -0,0 +1,331 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8550-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8550 Display MDSS
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@xxxxxxxxxx>
+
+description:
+  SM8550 MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like
+  DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm8550-mdss
+
+  clocks:
+    items:
+      - description: Display MDSS AHB
+      - description: Display AHB
+      - description: Display hf AXI
+      - description: Display core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    maxItems: 2
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sm8550-dpu
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,mdss-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sm8550-dsi-phy-4nm
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sm8550-dispcc.h>
+    #include <dt-bindings/clock/qcom,sm8550-gcc.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,sm8550.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@ae00000 {
+        compatible = "qcom,sm8550-mdss";
+        reg = <0x0ae00000 0x1000>;
+        reg-names = "mdss";
+
+        interconnects = <&mmss_noc MASTER_MDP 0 &gem_noc SLAVE_LLCC 0>,
+                        <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>
+        interconnect-names = "mdp0-mem", "mdp1-mem";
+
+        resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
+        power-domains = <&dispcc MDSS_GDSC>;
+
+        clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&gcc GCC_DISP_AHB_CLK>,
+                 <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+        clock-names = "iface", "bus", "nrt_bus", "core";
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        iommus = <&apps_smmu 0x1c00 0x2>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,sm8550-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc GCC_DISP_AHB_CLK>,
+                    <&gcc GCC_DISP_HF_AXI_CLK>,
+                    <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                    <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                    <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                    <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            clock-names = "bus",
+                          "nrt_bus",
+                          "iface",
+                          "lut",
+                          "core",
+                          "vsync";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            assigned-clock-rates = <19200000>;
+
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmhpd SM8550_MMCX>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dpu_intf2_out: endpoint {
+                        remote-endpoint = <&dsi1_in>;
+                    };
+                };
+            };
+
+            mdp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-200000000 {
+                    opp-hz = /bits/ 64 <200000000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-325000000 {
+                    opp-hz = /bits/ 64 <325000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-375000000 {
+                    opp-hz = /bits/ 64 <375000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+
+                opp-514000000 {
+                    opp-hz = /bits/ 64 <514000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+            };
+        };
+
+        dsi@ae94000 {
+            compatible = "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd SM8550_MMCX>;
+
+            phys = <&dsi0_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi0_out: endpoint {
+                    };
+                };
+            };
+
+            dsi_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-187500000 {
+                    opp-hz = /bits/ 64 <187500000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-300000000 {
+                    opp-hz = /bits/ 64 <300000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-358000000 {
+                    opp-hz = /bits/ 64 <358000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+            };
+        };
+
+        dsi0_phy: phy@ae94400 {
+            compatible = "qcom,dsi-phy-4nm-8550";
+            reg = <0x0ae95000 0x200>,
+                  <0x0ae95200 0x280>,
+                  <0x0ae95500 0x400>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+        };
+
+        dsi@ae96000 {
+            compatible = "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae96000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <5>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+            assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd SM8550_MMCX>;
+
+            phys = <&dsi1_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi1_in: endpoint {
+                        remote-endpoint = <&dpu_intf2_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi1_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        dsi1_phy: phy@ae96400 {
+            compatible = "qcom,dsi-phy-4nm-8550";
+            reg = <0x0ae97000 0x200>,
+                  <0x0ae97200 0x280>,
+                  <0x0ae97500 0x400>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+        };
+    };
+...

-- 
2.34.1



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux