[PATCH v3 6/7] drm/msm/dsi: add support for DSI-PHY on SM8550

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



SM8550 use a 4nm DSI PHYs, which share register definitions
with 7nm DSI PHYs. Rather than duplicating the driver, handle
4nm variant inside the common 5+7nm driver.

Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
---
 drivers/gpu/drm/msm/Kconfig               |  4 +-
 drivers/gpu/drm/msm/dsi/phy/dsi_phy.c     |  2 +
 drivers/gpu/drm/msm/dsi/phy/dsi_phy.h     |  1 +
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c | 88 ++++++++++++++++++++++++++-----
 4 files changed, 79 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/msm/Kconfig b/drivers/gpu/drm/msm/Kconfig
index e7b100d97f88..949b18a29a55 100644
--- a/drivers/gpu/drm/msm/Kconfig
+++ b/drivers/gpu/drm/msm/Kconfig
@@ -140,11 +140,11 @@ config DRM_MSM_DSI_10NM_PHY
 	  Choose this option if DSI PHY on SDM845 is used on the platform.
 
 config DRM_MSM_DSI_7NM_PHY
-	bool "Enable DSI 7nm/5nm PHY driver in MSM DRM"
+	bool "Enable DSI 7nm/5nm/4nm PHY driver in MSM DRM"
 	depends on DRM_MSM_DSI
 	default y
 	help
-	  Choose this option if DSI PHY on SM8150/SM8250/SM8350/SM8450/SC7280
+	  Choose this option if DSI PHY on SM8150/SM8250/SM8350/SM8450/SM8550/SC7280
 	  is used on the platform.
 
 config DRM_MSM_HDMI
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
index 04126af74bb5..cbe669fca26d 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
@@ -573,6 +573,8 @@ static const struct of_device_id dsi_phy_dt_match[] = {
 	  .data = &dsi_phy_5nm_8350_cfgs },
 	{ .compatible = "qcom,sm8450-dsi-phy-5nm",
 	  .data = &dsi_phy_5nm_8450_cfgs },
+	{ .compatible = "qcom,sm8550-dsi-phy-4nm",
+	  .data = &dsi_phy_4nm_8550_cfgs },
 #endif
 	{}
 };
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
index f7a907ed2b4b..58f9e09f5224 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
@@ -59,6 +59,7 @@ extern const struct msm_dsi_phy_cfg dsi_phy_7nm_8150_cfgs;
 extern const struct msm_dsi_phy_cfg dsi_phy_7nm_7280_cfgs;
 extern const struct msm_dsi_phy_cfg dsi_phy_5nm_8350_cfgs;
 extern const struct msm_dsi_phy_cfg dsi_phy_5nm_8450_cfgs;
+extern const struct msm_dsi_phy_cfg dsi_phy_4nm_8550_cfgs;
 
 struct msm_dsi_dphy_timing {
 	u32 clk_zero;
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
index 7b2c16b3a36c..af5c952c6ad0 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
@@ -47,6 +47,8 @@
 #define DSI_PHY_7NM_QUIRK_V4_2		BIT(2)
 /* Hardware is V4.3 */
 #define DSI_PHY_7NM_QUIRK_V4_3		BIT(3)
+/* Hardware is V5.2 */
+#define DSI_PHY_7NM_QUIRK_V5_2		BIT(4)
 
 struct dsi_pll_config {
 	bool enable_ssc;
@@ -124,14 +126,25 @@ static void dsi_pll_calc_dec_frac(struct dsi_pll_7nm *pll, struct dsi_pll_config
 
 	if (pll->phy->cfg->quirks & DSI_PHY_7NM_QUIRK_PRE_V4_1)
 		config->pll_clock_inverters = 0x28;
-	else if (pll_freq <= 1000000000ULL)
-		config->pll_clock_inverters = 0xa0;
-	else if (pll_freq <= 2500000000ULL)
-		config->pll_clock_inverters = 0x20;
-	else if (pll_freq <= 3020000000ULL)
-		config->pll_clock_inverters = 0x00;
-	else
-		config->pll_clock_inverters = 0x40;
+	else if ((pll->phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V5_2)) {
+		if (pll_freq <= 1300000000ULL)
+			config->pll_clock_inverters = 0xa0;
+		else if (pll_freq <= 2500000000ULL)
+			config->pll_clock_inverters = 0x20;
+		else if (pll_freq <= 4000000000ULL)
+			config->pll_clock_inverters = 0x00;
+		else
+			config->pll_clock_inverters = 0x40;
+	} else {
+		if (pll_freq <= 1000000000ULL)
+			config->pll_clock_inverters = 0xa0;
+		else if (pll_freq <= 2500000000ULL)
+			config->pll_clock_inverters = 0x20;
+		else if (pll_freq <= 3020000000ULL)
+			config->pll_clock_inverters = 0x00;
+		else
+			config->pll_clock_inverters = 0x40;
+	}
 
 	config->decimal_div_start = dec;
 	config->frac_div_start = frac;
@@ -222,6 +235,13 @@ static void dsi_pll_config_hzindep_reg(struct dsi_pll_7nm *pll)
 			vco_config_1 = 0x01;
 	}
 
+	if ((pll->phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V5_2)) {
+		if (pll->vco_current_rate < 1557000000ULL)
+			vco_config_1 = 0x08;
+		else
+			vco_config_1 = 0x01;
+	}
+
 	dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_ANALOG_CONTROLS_FIVE_1,
 		      analog_controls_five_1);
 	dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_VCO_CONFIG_1, vco_config_1);
@@ -860,7 +880,8 @@ static int dsi_7nm_phy_enable(struct msm_dsi_phy *phy,
 		pr_warn("PLL turned on before configuring PHY\n");
 
 	/* Request for REFGEN READY */
-	if (phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_3) {
+	if ((phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_3) ||
+	    (phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V5_2)) {
 		dsi_phy_write(phy->base + REG_DSI_7nm_PHY_CMN_GLBL_DIGTOP_SPARE10, 0x1);
 		udelay(500);
 	}
@@ -894,7 +915,19 @@ static int dsi_7nm_phy_enable(struct msm_dsi_phy *phy,
 		lane_ctrl0 = 0x1f;
 	}
 
-	if (phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_3) {
+	if ((phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V5_2)) {
+		if (phy->cphy_mode) {
+			vreg_ctrl_0 = 0x45;
+			vreg_ctrl_1 = 0x45;
+			glbl_rescode_top_ctrl = 0x00;
+			glbl_rescode_bot_ctrl = 0x00;
+		} else {
+			vreg_ctrl_0 = 0x44;
+			vreg_ctrl_1 = 0x19;
+			glbl_rescode_top_ctrl = less_than_1500_mhz ? 0x3c :  0x03;
+			glbl_rescode_bot_ctrl = less_than_1500_mhz ? 0x38 :  0x3c;
+		}
+	} else if ((phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_3)) {
 		if (phy->cphy_mode) {
 			glbl_rescode_top_ctrl = less_than_1500_mhz ? 0x3d :  0x01;
 			glbl_rescode_bot_ctrl = less_than_1500_mhz ? 0x38 :  0x3b;
@@ -943,9 +976,8 @@ static int dsi_7nm_phy_enable(struct msm_dsi_phy *phy,
 	dsi_phy_write(base + REG_DSI_7nm_PHY_CMN_RBUF_CTRL, 0x00);
 
 	/* program CMN_CTRL_4 for minor_ver 2 chipsets*/
-	data = dsi_phy_read(base + REG_DSI_7nm_PHY_CMN_REVISION_ID0);
-	data = data & (0xf0);
-	if (data == 0x20)
+	if ((phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V5_2) ||
+	    (dsi_phy_read(base + REG_DSI_7nm_PHY_CMN_REVISION_ID0) & (0xf0)) == 0x20)
 		dsi_phy_write(base + REG_DSI_7nm_PHY_CMN_CTRL_4, 0x04);
 
 	/* Configure PHY lane swap (TODO: we need to calculate this) */
@@ -1058,7 +1090,8 @@ static void dsi_7nm_phy_disable(struct msm_dsi_phy *phy)
 	dsi_phy_hw_v4_0_config_lpcdrx(phy, false);
 
 	/* Turn off REFGEN Vote */
-	if (phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_3) {
+	if ((phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_3) ||
+	    (phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V5_2)) {
 		dsi_phy_write(base + REG_DSI_7nm_PHY_CMN_GLBL_DIGTOP_SPARE10, 0x0);
 		wmb();
 		/* Delay to ensure HW removes vote before PHY shut down */
@@ -1092,6 +1125,10 @@ static const struct regulator_bulk_data dsi_phy_7nm_97800uA_regulators[] = {
 	{ .supply = "vdds", .init_load_uA = 97800 },
 };
 
+static const struct regulator_bulk_data dsi_phy_7nm_98400uA_regulators[] = {
+	{ .supply = "vdds", .init_load_uA = 98400 },
+};
+
 const struct msm_dsi_phy_cfg dsi_phy_7nm_cfgs = {
 	.has_phy_lane = true,
 	.regulator_data = dsi_phy_7nm_36mA_regulators,
@@ -1201,3 +1238,26 @@ const struct msm_dsi_phy_cfg dsi_phy_5nm_8450_cfgs = {
 	.num_dsi_phy = 2,
 	.quirks = DSI_PHY_7NM_QUIRK_V4_3,
 };
+
+const struct msm_dsi_phy_cfg dsi_phy_4nm_8550_cfgs = {
+	.has_phy_lane = true,
+	.regulator_data = dsi_phy_7nm_98400uA_regulators,
+	.num_regulators = ARRAY_SIZE(dsi_phy_7nm_98400uA_regulators),
+	.ops = {
+		.enable = dsi_7nm_phy_enable,
+		.disable = dsi_7nm_phy_disable,
+		.pll_init = dsi_pll_7nm_init,
+		.save_pll_state = dsi_7nm_pll_save_state,
+		.restore_pll_state = dsi_7nm_pll_restore_state,
+		.set_continuous_clock = dsi_7nm_set_continuous_clock,
+	},
+	.min_pll_rate = 600000000UL,
+#ifdef CONFIG_64BIT
+	.max_pll_rate = 5000000000UL,
+#else
+	.max_pll_rate = ULONG_MAX,
+#endif
+	.io_start = { 0xae95000, 0xae97000 },
+	.num_dsi_phy = 2,
+	.quirks = DSI_PHY_7NM_QUIRK_V5_2,
+};

-- 
2.34.1



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux