Drop the #clock-cells (leftover probably from the times before the DP
PHY split) and rename dp-opp-table to just opp-table.
Fixes: eaac4e55a6f4 ("arm64: dts: qcom: sdm845: add displayport node")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sdm845.dtsi | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 9e881e19b984..fa62479206ce 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -4593,7 +4593,6 @@ mdss_dp: displayport-controller@ae90000 {
<&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
clock-names = "core_iface", "core_aux", "ctrl_link",
"ctrl_link_iface", "stream_pixel";
- #clock-cells = <1>;
assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
<&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
@@ -4619,7 +4618,7 @@ port@1 {
};
};
- dp_opp_table: dp-opp-table {
+ dp_opp_table: opp-table {
compatible = "operating-points-v2";
opp-162000000 {
--
2.39.0
