Avoid the warning below triggered during dmaengine async device registration. WARNING: CPU: 1 PID: 1 at linux/drivers/dma/dmaengine.c:863 dma_async_device_register+0x2a8/0x4b8() this driver doesn't support generic slave capabilities reporting To do that fill mandatory .directions bit mask, .src/dst_addr_widths and .residue_granularity dma_device fields with appropriate values. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@xxxxxxxxxx> --- v1 -> v2 - the patch subject has been changed - now fill also .residue_granularity and src/dts_addr_widths - added the warning in patch description v1 can be found at https://lkml.org/lkml/2015/3/4/896 drivers/dma/qcom_bam_dma.c | 4 ++++ 1 files changed, 4 insertions(+), 0 deletions(-) diff --git a/drivers/dma/qcom_bam_dma.c b/drivers/dma/qcom_bam_dma.c index c3113e3..9c914d6 100644 --- a/drivers/dma/qcom_bam_dma.c +++ b/drivers/dma/qcom_bam_dma.c @@ -1143,6 +1143,10 @@ static int bam_dma_probe(struct platform_device *pdev) dma_cap_set(DMA_SLAVE, bdev->common.cap_mask); /* initialize dmaengine apis */ + bdev->common.directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV); + bdev->common.residue_granularity = DMA_RESIDUE_GRANULARITY_SEGMENT; + bdev->common.src_addr_widths = DMA_SLAVE_BUSWIDTH_4_BYTES; + bdev->common.dst_addr_widths = DMA_SLAVE_BUSWIDTH_4_BYTES; bdev->common.device_alloc_chan_resources = bam_alloc_chan; bdev->common.device_free_chan_resources = bam_free_chan; bdev->common.device_prep_slave_sg = bam_prep_slave_sg; -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
