Re: [PATCH 2/9] dt-bindings: pinctrl: qcom,sc8280xp-lpass-lpi: add input-enable and bias-bus-hold

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Dec 30, 2022 at 02:56:38PM +0100, Krzysztof Kozlowski wrote:
> Allow bias-bus-hold and input-enable properties (already used in
> SC8280XP LPASS LPI nodes):
> 
>   sa8540p-ride.dtb: pinctrl@33c0000: tx-swr-default-state: 'oneOf' conditional failed, one must be fixed:
>     'pins' is a required property
>     'function' is a required property
>     'clk-pins', 'data-pins' do not match any of the regexes: 'pinctrl-[0-9]+'
>     'bias-bus-hold' does not match any of the regexes: 'pinctrl-[0-9]+'
>     'gpio2' does not match '^gpio([0-1]|1[0-8])$'

Wrong warning?

> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> ---
>  .../bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml   | 6 ++----
>  1 file changed, 2 insertions(+), 4 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml
> index 309d3dd9013b..9a3f1fb8c2f7 100644
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml
> @@ -94,14 +94,12 @@ $defs:
>            2: Lower Slew rate (slower edges)
>            3: Reserved (No adjustments)
>  
> +      bias-bus-hold: true
>        bias-pull-down: true
> -
>        bias-pull-up: true
> -
>        bias-disable: true
> -
> +      input-enable: true
>        output-high: true
> -
>        output-low: true
>  
>      required:
> -- 
> 2.34.1
> 
> 



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux