Re: [Freedreno] [RFC PATCH v3 3/3] drm/msm/dpu: Use color_fill property for DPU planes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 1/4/2023 6:16 PM, Dmitry Baryshkov wrote:
On 05/01/2023 01:40, Jessica Zhang wrote:
Initialize and use the color_fill properties for planes in DPU driver. In
addition, relax framebuffer requirements within atomic commit path and
add checks for NULL framebuffers. Finally, drop DPU_PLANE_COLOR_FILL_FLAG
as it's unused.

Changes since V2:
- Fixed dropped 'const' warning
- Dropped use of solid_fill_format
- Switched to using drm_plane_solid_fill_enabled helper method
- Added helper to convert color fill to BGR888 (Rob)
- Added support for solid fill on planes of varying sizes
- Removed DPU_PLANE_COLOR_FILL_FLAG

Signed-off-by: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
---
  drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c  |  9 +++-
  drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 65 ++++++++++++++---------
  2 files changed, 49 insertions(+), 25 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
index 13ce321283ff..0695b70ea1b7 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
@@ -409,6 +409,7 @@ static void _dpu_crtc_blend_setup_mixer(struct drm_crtc *crtc,
      struct drm_plane_state *state;
      struct dpu_crtc_state *cstate = to_dpu_crtc_state(crtc->state);
      struct dpu_plane_state *pstate = NULL;
+    const struct msm_format *fmt;
      struct dpu_format *format;
      struct dpu_hw_ctl *ctl = mixer->lm_ctl;
@@ -441,7 +442,13 @@ static void _dpu_crtc_blend_setup_mixer(struct drm_crtc *crtc,
                  sspp_idx - SSPP_VIG0,
                  state->fb ? state->fb->base.id : -1);
-        format = to_dpu_format(msm_framebuffer_format(pstate->base.fb));
+        if (pstate->base.fb)
+            fmt = msm_framebuffer_format(pstate->base.fb);
+        else
+            fmt = dpu_get_msm_format(&_dpu_crtc_get_kms(crtc)->base,
+                    DRM_FORMAT_ABGR8888, 0);
+
+        format = to_dpu_format(fmt);
          if (pstate->stage == DPU_STAGE_BASE && format->alpha_enable)
              bg_alpha_enable = true;
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
index 86719020afe2..51a7507373f7 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
@@ -44,7 +44,6 @@
  #define DPU_NAME_SIZE  12
-#define DPU_PLANE_COLOR_FILL_FLAG    BIT(31)
  #define DPU_ZPOS_MAX 255
  /* multirect rect index */
@@ -105,7 +104,6 @@ struct dpu_plane {
      enum dpu_sspp pipe;
      struct dpu_hw_pipe *pipe_hw;
-    uint32_t color_fill;
      bool is_error;
      bool is_rt_pipe;
      const struct dpu_mdss_cfg *catalog;
@@ -678,6 +676,17 @@ static void _dpu_plane_setup_scaler(struct dpu_plane *pdpu,
                  &scaler3_cfg);
  }
+static uint32_t _dpu_plane_get_fill_color(struct drm_solid_fill solid_fill)
+{
+    uint32_t ret = 0;
+
+    ret |= ((uint8_t) solid_fill.b) << 16;
+    ret |= ((uint8_t) solid_fill.g) << 8;
+    ret |= ((uint8_t) solid_fill.r);
+
+    return ret;
+}
+
  /**
   * _dpu_plane_color_fill - enables color fill on plane
   * @pdpu:   Pointer to DPU plane object
@@ -1001,12 +1010,17 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
      dst = drm_plane_state_dest(new_plane_state);
-    fb_rect.x2 = new_plane_state->fb->width;
-    fb_rect.y2 = new_plane_state->fb->height;
+    if (new_plane_state->fb) {
+        fb_rect.x2 = new_plane_state->fb->width;
+        fb_rect.y2 = new_plane_state->fb->height;
+    }
      max_linewidth = pdpu->catalog->caps->max_linewidth;
-    fmt = to_dpu_format(msm_framebuffer_format(new_plane_state->fb));
+    if (new_plane_state->fb)
+        fmt = to_dpu_format(msm_framebuffer_format(new_plane_state->fb));
+    else
+        fmt = dpu_get_dpu_format(DRM_FORMAT_ABGR8888);

I think this should be more explicit:

if (solid_fill)
    fmt = dpu_get_dpu_format(...)
else
    fmt = to_dpu_format(msm_framebuffer_format(...).

And in the _dpu_crtc_blend_setup_mixer() too.

Hi Dmitry,

Noted.


Maybe the code can be extracted to a helper.

      min_src_size = DPU_FORMAT_IS_YUV(fmt) ? 2 : 1;
@@ -1018,7 +1032,7 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
          return -EINVAL;
      /* check src bounds */
-    } else if (!dpu_plane_validate_src(&src, &fb_rect, min_src_size)) {
+    } else if (new_plane_state->fb && !dpu_plane_validate_src(&src, &fb_rect, min_src_size)) {
          DPU_DEBUG_PLANE(pdpu, "invalid source " DRM_RECT_FMT "\n",
                  DRM_RECT_ARG(&src));
          return -E2BIG;
@@ -1086,9 +1100,10 @@ void dpu_plane_flush(struct drm_plane *plane)
      if (pdpu->is_error)
          /* force white frame with 100% alpha pipe output on error */
          _dpu_plane_color_fill(pdpu, 0xFFFFFF, 0xFF);
-    else if (pdpu->color_fill & DPU_PLANE_COLOR_FILL_FLAG)
+    else if (!(plane->state->fb) && drm_plane_solid_fill_enabled(plane->state))
          /* force 100% alpha */
-        _dpu_plane_color_fill(pdpu, pdpu->color_fill, 0xFF);
+        _dpu_plane_color_fill(pdpu, _dpu_plane_get_fill_color(plane->state->solid_fill),
+                0xFF);

I'd push alpha into _dpu_plane_get_fill_color(). Then adding alpha support would be more transparent.

Acked.


      else if (pdpu->pipe_hw && pdpu->pipe_hw->ops.setup_csc) {
          const struct dpu_format *fmt = to_dpu_format(msm_framebuffer_format(plane->state->fb));           const struct dpu_csc_cfg *csc_ptr = _dpu_plane_get_csc(pdpu, fmt); @@ -1127,23 +1142,30 @@ static void dpu_plane_sspp_atomic_update(struct drm_plane *plane)
      struct drm_crtc *crtc = state->crtc;
      struct drm_framebuffer *fb = state->fb;
      bool is_rt_pipe, update_qos_remap;
-    const struct dpu_format *fmt =
-        to_dpu_format(msm_framebuffer_format(fb));
+    const struct dpu_format *fmt;
      struct dpu_hw_pipe_cfg pipe_cfg;
-    memset(&pipe_cfg, 0, sizeof(struct dpu_hw_pipe_cfg));
-
-    _dpu_plane_set_scanout(plane, pstate, &pipe_cfg, fb);
-
      pstate->pending = true;
      is_rt_pipe = (dpu_crtc_get_client_type(crtc) != NRT_CLIENT);
      _dpu_plane_set_qos_ctrl(plane, false, DPU_PLANE_QOS_PANIC_CTRL);
-    DPU_DEBUG_PLANE(pdpu, "FB[%u] " DRM_RECT_FP_FMT "->crtc%u " DRM_RECT_FMT -            ", %4.4s ubwc %d\n", fb->base.id, DRM_RECT_FP_ARG(&state->src),
-            crtc->base.id, DRM_RECT_ARG(&state->dst),
-            (char *)&fmt->base.pixel_format, DPU_FORMAT_IS_UBWC(fmt));
+    /* override for color fill */
+    if (!fb && drm_plane_solid_fill_enabled(plane->state)) {
+        /* skip remaining processing on color fill */
+        return;
+    }
+
+    memset(&pipe_cfg, 0, sizeof(struct dpu_hw_pipe_cfg));
+
+    fmt = to_dpu_format(msm_framebuffer_format(fb));
+    _dpu_plane_set_scanout(plane, pstate, &pipe_cfg, fb);

This change deserves a comment somewhere (in the commit message?). Beforehand the driver tried to set the scanout/layout for the COLOR_FILL case. You have changed this.

Sounds good.

Thanks,

Jessica Zhang


+
+    if (fb)
+        DPU_DEBUG_PLANE(pdpu, "FB[%u] " DRM_RECT_FP_FMT "->crtc%u " DRM_RECT_FMT +                ", %4.4s ubwc %d\n", fb->base.id, DRM_RECT_FP_ARG(&state->src),
+                crtc->base.id, DRM_RECT_ARG(&state->dst),
+                (char *)&fmt->base.pixel_format, DPU_FORMAT_IS_UBWC(fmt));
      pipe_cfg.src_rect = state->src;
@@ -1155,12 +1177,6 @@ static void dpu_plane_sspp_atomic_update(struct drm_plane *plane)
      pipe_cfg.dst_rect = state->dst;
-    /* override for color fill */
-    if (pdpu->color_fill & DPU_PLANE_COLOR_FILL_FLAG) {
-        /* skip remaining processing on color fill */
-        return;
-    }
-
      if (pdpu->pipe_hw->ops.setup_rects) {
          pdpu->pipe_hw->ops.setup_rects(pdpu->pipe_hw,
                  &pipe_cfg,
@@ -1511,6 +1527,7 @@ struct drm_plane *dpu_plane_init(struct drm_device *dev,
          DPU_ERROR("failed to install zpos property, rc = %d\n", ret);
      drm_plane_create_alpha_property(plane);
+    drm_plane_create_solid_fill_property(plane);
      drm_plane_create_blend_mode_property(plane,
              BIT(DRM_MODE_BLEND_PIXEL_NONE) |
              BIT(DRM_MODE_BLEND_PREMULTI) |

--
With best wishes
Dmitry




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux