Re: Annoying message on the console for the db845c board

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 6 Jan 2023 at 18:37, Daniel Lezcano <daniel.lezcano@xxxxxxxxxx> wrote:
>
>
> Hi all,
>
> Does anyone have an idea on how to fix these timeout messages ? They are
> displayed again and again every 5 seconds and that saturates the
> filesystem after awhile.

Could you please check that you have CONFIG_QCOM_RMTFS_MEM enabled and
the rmtfs daemon running?
I think that's the usual cause of such messages.

>
> ...
> [   24.662181] qcom-q6v5-mss 4080000.remoteproc: start timed out
> [   24.768150] qcom-q6v5-mss 4080000.remoteproc: port failed halt
> [   24.777618] remoteproc remoteproc0: can't start rproc
> 4080000.remoteproc: -110
> [   24.785022] remoteproc remoteproc0: Boot failed: -110
> [   24.833657] remoteproc remoteproc0: powering up 4080000.remoteproc
> [   24.840126] remoteproc remoteproc0: Booting fw image
> qcom/sdm845/mba.mbn, size 238304
> [   24.897361] qcom-q6v5-mss 4080000.remoteproc: MBA booted without
> debug policy, loading mpss
> [   31.573938] qcom-q6v5-mss 4080000.remoteproc: start timed out
> [   31.680229] qcom-q6v5-mss 4080000.remoteproc: port failed halt
> [   31.689683] remoteproc remoteproc0: can't start rproc
> 4080000.remoteproc: -110
> [   31.697070] remoteproc remoteproc0: Boot failed: -110
> [   31.765283] remoteproc remoteproc0: powering up 4080000.remoteproc
> [   31.771758] remoteproc remoteproc0: Booting fw image
> qcom/sdm845/mba.mbn, size 238304
> [   31.820553] qcom-q6v5-mss 4080000.remoteproc: MBA booted without
> debug policy, loading mpss
> ....


-- 
With best wishes
Dmitry



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux