Re: [RESEND PATCH v5 0/2] Add LED driver for flash module in QCOM PMICs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Pavel, Jones,

Can you help to review the new flash LED driver changes for Qcom flash LED module when you are available? It's pending for while.
Thanks

Fenglin

On 2022/12/27 16:15, Fenglin Wu wrote:
Initial driver and binding document changes for supporting flash LED
module in Qualcomm Technologies, Inc. PMICs.

Changes in V5:
   1. Add MODULE_DEVICE_TABLE for auto-loading.

Changes in V4:
   1. Added Tested-By tag.
   2. Addressed review comments in the binding change and added
      Reviewed-by tag.

Changes in V3:
   1. Updated the driver to use regmap_field for register access.
   2. Adressed the review comments in binding document change.

Changes in V2:
   1. Addressed review comments in binding change, thanks Krzysztof!
   2. Updated driver to address the compilation issue reported by
      kernel test robot.

Fenglin Wu (2):
   leds: flash: add driver to support flash LED module in QCOM PMICs
   dt-bindings: leds: add QCOM flash LED controller

  .../bindings/leds/qcom,spmi-flash-led.yaml    | 116 +++
  drivers/leds/flash/Kconfig                    |  15 +
  drivers/leds/flash/Makefile                   |   1 +
  drivers/leds/flash/leds-qcom-flash.c          | 701 ++++++++++++++++++
  4 files changed, 833 insertions(+)
  create mode 100644 Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml
  create mode 100644 drivers/leds/flash/leds-qcom-flash.c




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux