Add the CPU OPP tables including core frequency and L3 bus frequency.
The L3 throughput values were chosen by studying the frequencies
available in HW LUT and picking the highest one that's less than the
CPU frequency. DDR clock rates come from the vendor kernel.
Available values from the HW LUT:
300000000
556800000
652800000
806400000
844800000
940800000
1132800000
1209600000
1286400000
1401600000
1459200000
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm6350.dtsi | 131 +++++++++++++++++++++++++++
arch/arm64/boot/dts/qcom/sm7225.dtsi | 19 ++++
2 files changed, 150 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index 893a1ffb5e3d..411a8279f84f 100644
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -10,6 +10,7 @@
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/dma/qcom-gpi.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,osm-l3.h>
#include <dt-bindings/interconnect/qcom,sm6350.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/mailbox/qcom-ipcc.h>
@@ -49,6 +50,9 @@ CPU0: cpu@0 {
dynamic-power-coefficient = <100>;
next-level-cache = <&L2_0>;
qcom,freq-domain = <&cpufreq_hw 0>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ interconnects = <&gem_noc MASTER_AMPSS_M0 0 &clk_virt SLAVE_EBI_CH0 0>,
+ <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
L2_0: l2-cache {
compatible = "cache";
@@ -68,6 +72,9 @@ CPU1: cpu@100 {
dynamic-power-coefficient = <100>;
next-level-cache = <&L2_100>;
qcom,freq-domain = <&cpufreq_hw 0>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ interconnects = <&gem_noc MASTER_AMPSS_M0 0 &clk_virt SLAVE_EBI_CH0 0>,
+ <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
L2_100: l2-cache {
compatible = "cache";
@@ -84,6 +91,9 @@ CPU2: cpu@200 {
dynamic-power-coefficient = <100>;
next-level-cache = <&L2_200>;
qcom,freq-domain = <&cpufreq_hw 0>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ interconnects = <&gem_noc MASTER_AMPSS_M0 0 &clk_virt SLAVE_EBI_CH0 0>,
+ <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
L2_200: l2-cache {
compatible = "cache";
@@ -100,6 +110,9 @@ CPU3: cpu@300 {
dynamic-power-coefficient = <100>;
next-level-cache = <&L2_300>;
qcom,freq-domain = <&cpufreq_hw 0>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ interconnects = <&gem_noc MASTER_AMPSS_M0 0 &clk_virt SLAVE_EBI_CH0 0>,
+ <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
L2_300: l2-cache {
compatible = "cache";
@@ -116,6 +129,9 @@ CPU4: cpu@400 {
dynamic-power-coefficient = <100>;
next-level-cache = <&L2_400>;
qcom,freq-domain = <&cpufreq_hw 0>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ interconnects = <&gem_noc MASTER_AMPSS_M0 0 &clk_virt SLAVE_EBI_CH0 0>,
+ <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
L2_400: l2-cache {
compatible = "cache";
@@ -132,6 +148,9 @@ CPU5: cpu@500 {
dynamic-power-coefficient = <100>;
next-level-cache = <&L2_500>;
qcom,freq-domain = <&cpufreq_hw 0>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ interconnects = <&gem_noc MASTER_AMPSS_M0 0 &clk_virt SLAVE_EBI_CH0 0>,
+ <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
L2_500: l2-cache {
compatible = "cache";
@@ -149,6 +168,9 @@ CPU6: cpu@600 {
dynamic-power-coefficient = <703>;
next-level-cache = <&L2_600>;
qcom,freq-domain = <&cpufreq_hw 1>;
+ operating-points-v2 = <&cpu6_opp_table>;
+ interconnects = <&gem_noc MASTER_AMPSS_M0 0 &clk_virt SLAVE_EBI_CH0 0>,
+ <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
L2_600: l2-cache {
compatible = "cache";
@@ -165,6 +187,9 @@ CPU7: cpu@700 {
dynamic-power-coefficient = <703>;
next-level-cache = <&L2_700>;
qcom,freq-domain = <&cpufreq_hw 1>;
+ operating-points-v2 = <&cpu6_opp_table>;
+ interconnects = <&gem_noc MASTER_AMPSS_M0 0 &clk_virt SLAVE_EBI_CH0 0>,
+ <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
L2_700: l2-cache {
compatible = "cache";
@@ -222,6 +247,112 @@ memory@80000000 {
reg = <0x0 0x80000000 0x0 0x0>;
};
+ cpu0_opp_table: opp-table-cpu0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ /* DDR: 4-wide, 2 channels, double data rate, L3: 16-wide, 2 channels */
+ opp-peak-kBps = <(200000 * 4 * 2 * 2) (300000 * 16 * 2)>;
+ };
+
+ opp-576000000 {
+ opp-hz = /bits/ 64 <576000000>;
+ opp-peak-kBps = <(547000 * 4 * 2 * 2) (556800 * 16 * 2)>;
+ };
+
+ opp-768000000 {
+ opp-hz = /bits/ 64 <768000000>;
+ opp-peak-kBps = <(768000 * 4 * 2 * 2) (652800 * 16 * 2)>;
+ };
+
+ opp-1017600000 {
+ opp-hz = /bits/ 64 <1017600000>;
+ opp-peak-kBps = <(1017000 * 4 * 2 * 2) (940800 * 16 * 2)>;
+ };
+
+ opp-1248000000 {
+ opp-hz = /bits/ 64 <1248000000>;
+ opp-peak-kBps = <(1017000 * 4 * 2 * 2) (1209600 * 16 * 2)>;
+ };
+
+ opp-1324800000 {
+ opp-hz = /bits/ 64 <1324800000>;
+ opp-peak-kBps = <(1017000 * 4 * 2 * 2) (1286400 * 16 * 2)>;
+ };
+
+ opp-1516800000 {
+ opp-hz = /bits/ 64 <1516800000>;
+ opp-peak-kBps = <(1353000 * 4 * 2 * 2) (1459200 * 16 * 2)>;
+ };
+
+ opp-1612800000 {
+ opp-hz = /bits/ 64 <1612800000>;
+ opp-peak-kBps = <(1555000 * 4 * 2 * 2) (1459200 * 16 * 2)>;
+ };
+
+ opp-1708800000 {
+ opp-hz = /bits/ 64 <1708800000>;
+ opp-peak-kBps = <(1555000 * 4 * 2 * 2) (1459200 * 16 * 2)>;
+ };
+ };
+
+ cpu6_opp_table: opp-table-cpu6 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ opp-peak-kBps = <(200000 * 4 * 2 * 2) (300000 * 16 * 2)>;
+ };
+
+ opp-787200000 {
+ opp-hz = /bits/ 64 <787200000>;
+ opp-peak-kBps = <(768000 * 4 * 2 * 2) (652800 * 16 * 2)>;
+ };
+
+ opp-979200000 {
+ opp-hz = /bits/ 64 <979200000>;
+ opp-peak-kBps = <(768000 * 4 * 2 * 2) (940800 * 16 * 2)>;
+ };
+
+ opp-1036800000 {
+ opp-hz = /bits/ 64 <1036800000>;
+ opp-peak-kBps = <(1017000 * 4 * 2 * 2) (940800 * 16 * 2)>;
+ };
+
+ opp-1248000000 {
+ opp-hz = /bits/ 64 <1248000000>;
+ opp-peak-kBps = <(1017000 * 4 * 2 * 2) (1209600 * 16 * 2)>;
+ };
+
+ opp-1401600000 {
+ opp-hz = /bits/ 64 <1401600000>;
+ opp-peak-kBps = <(1353000 * 4 * 2 * 2) (1401600 * 16 * 2)>;
+ };
+
+ opp-1555200000 {
+ opp-hz = /bits/ 64 <1555200000>;
+ opp-peak-kBps = <(1555000 * 4 * 2 * 2) (1459200 * 16 * 2)>;
+ };
+
+ opp-1766400000 {
+ opp-hz = /bits/ 64 <1766400000>;
+ opp-peak-kBps = <(1555000 * 4 * 2 * 2) (1459200 * 16 * 2)>;
+ };
+
+ opp-1900800000 {
+ opp-hz = /bits/ 64 <1900800000>;
+ opp-peak-kBps = <(1804000 * 4 * 2 * 2) (1459200 * 16 * 2)>;
+ };
+
+ opp-2073600000 {
+ opp-hz = /bits/ 64 <2073600000>;
+ opp-peak-kBps = <(2092000 * 4 * 2 * 2) (1459200 * 16 * 2)>;
+ };
+ };
+
pmu {
compatible = "arm,armv8-pmuv3";
interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_LOW>;
diff --git a/arch/arm64/boot/dts/qcom/sm7225.dtsi b/arch/arm64/boot/dts/qcom/sm7225.dtsi
index 7b2a002ca7ff..b7b4044e9bb0 100644
--- a/arch/arm64/boot/dts/qcom/sm7225.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm7225.dtsi
@@ -14,3 +14,22 @@
&CPU5 { compatible = "qcom,kryo570"; };
&CPU6 { compatible = "qcom,kryo570"; };
&CPU7 { compatible = "qcom,kryo570"; };
+
+&cpu0_opp_table {
+ opp-1804800000 {
+ opp-hz = /bits/ 64 <1804800000>;
+ opp-peak-kBps = <(1804000 * 4 * 2 * 2) (1459200 * 16 * 2)>;
+ };
+};
+
+&cpu6_opp_table {
+ opp-2131200000 {
+ opp-hz = /bits/ 64 <2131200000>;
+ opp-peak-kBps = <(2092000 * 4 * 2 * 2) (1459200 * 16 * 2)>;
+ };
+
+ opp-2208000000 {
+ opp-hz = /bits/ 64 <2208000000>;
+ opp-peak-kBps = <(2092000 * 4 * 2 * 2) (1459200 * 16 * 2)>;
+ };
+};
--
2.39.0
