Clean up the wcd938x codec node somewhat by adding newline separators,
reordering properties and renaming it 'audio-codec'.
Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8250-mtp.dts | 16 ++++++++++------
1 file changed, 10 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
index b741b7da1afc..0991b34a8e49 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
@@ -23,18 +23,16 @@ aliases {
serial0 = &uart12;
};
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- wcd938x: codec {
+ wcd938x: audio-codec {
compatible = "qcom,wcd9380-codec";
- #sound-dai-cells = <1>;
+
reset-gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
+
vdd-buck-supply = <&vreg_s4a_1p8>;
vdd-rxtx-supply = <&vreg_s4a_1p8>;
vdd-io-supply = <&vreg_s4a_1p8>;
vdd-mic-bias-supply = <&vreg_bob>;
+
qcom,micbias1-microvolt = <1800000>;
qcom,micbias2-microvolt = <1800000>;
qcom,micbias3-microvolt = <1800000>;
@@ -44,6 +42,12 @@ wcd938x: codec {
qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
qcom,rx-device = <&wcd_rx>;
qcom,tx-device = <&wcd_tx>;
+
+ #sound-dai-cells = <1>;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
};
thermal-zones {
--
2.37.4
