V2: - Sorts core dtsi node list by address followed by alpahbetical sorting within address sorted nodes - Bjorn - Drops use of 8916-pins - Bjorn - Adds msm8939-pm8916.dtsi - Stephan - Fixes every dts splat from previous submission minus non-converted .txt compat strings [1] and one yaml error in Bjorn's tree not in -next yet - I haven't applied Dmitry's change for tsens since that's not been picked up yet - Picks up a number of suggestions and fixes from Stephan Gerhold and Vincent Knecht - Depends on Applied: [PATCH v4 0/7] remoteproc: qcom_q6v5_mss: Add MSM8909 and MSM8953 https://lore.kernel.org/linux-arm-msm/167216232800.738877.17567287056128563074.b4-ty@xxxxxxxxxx/ [PATCH v6 0/5] remoteproc: qcom: Add support for pronto-v3 https://lore.kernel.org/linux-arm-msm/167216232801.738877.15895916910585144737.b4-ty@xxxxxxxxxx/ [PATCH v6 00/18] mdss-dsi-ctrl binding and dts fixes https://lore.kernel.org/linux-arm-msm/167233461766.1099840.17628700245792986354.b4-ty@xxxxxxxxxx/ Awaiting application: https://lore.kernel.org/linux-arm-msm/20221228133058.213886-1-bryan.odonoghue@xxxxxxxxxx/ - Previous https://lore.kernel.org/linux-arm-msm/20220419010903.3109514-1-bryan.odonoghue@xxxxxxxxxx/ - Bootable tree https://git.linaro.org/people/bryan.odonoghue/kernel.git/log/?h=linux-next-23-01-03-msm8939-no-cpr - [1] DTC_CHK arch/arm64/boot/dts/qcom/apq8039-t2.dtb Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt qcom/apq8039-t2.dtb: idle-states: cpu-sleep-0:compatible:0: 'qcom,idle-state-spc' is not one of ['arm,idle-state', 'riscv,idle-state'] From schema: Documentation/devicetree/bindings/cpu/idle-states.yaml qcom/apq8039-t2.dtb: idle-states: cpu-sleep-0:compatible: ['qcom,idle-state-spc', 'arm,idle-state'] is too long From schema: Documentation/devicetree/bindings/cpu/idle-states.yaml arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /cpus/idle-states/cpu-sleep-0: failed to match any schema with compatible: ['qcom,idle-state-spc', 'arm,idle-state'] Documentation/devicetree/bindings/iommu/qcom,iommu.txt arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/iommu@1ef0000: failed to match any schema with compatible: ['qcom,msm8916-iommu', 'qcom,msm-iommu-v1'] arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/iommu@1ef0000/iommu-ctx@4000: failed to match any schema with compatible: ['qcom,msm-iommu-v1-ns'] arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/iommu@1ef0000/iommu-ctx@5000: failed to match any schema with compatible: ['qcom,msm-iommu-v1-sec'] arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/iommu@1f08000: failed to match any schema with compatible: ['qcom,msm8916-iommu', 'qcom,msm-iommu-v1'] arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/iommu@1f08000/iommu-ctx@1000: failed to match any schema with compatible: ['qcom,msm-iommu-v1-ns'] arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/iommu@1f08000/iommu-ctx@2000: failed to match any schema with compatible: ['qcom,msm-iommu-v1-ns'] arch/arm64/boot/dts/qcom/pm8916.dtsi f5d7bca55425c8 qcom/apq8039-t2.dtb: pmic@0: 'extcon@1300' does not match any of the regexes: '(.*)?(wled|leds)@[0-9a-f]+$', '^adc-tm@[0-9a-f]+$', '^adc@[0-9a-f]+$', '^audio-codec@[0-9a-f]+$', '^charger@[0-9a-f]+$', '^mpps@[0-9a-f]+$', '^rtc@[0-9a-f]+$', '^temp-alarm@[0-9a-f]+$', '^usb-detect@[0-9a-f]+$', '^usb-vbus-regulator@[0-9a-f]+$', '^vibrator@[0-9a-f]+$', 'gpio@[0-9a-f]+$', 'pinctrl-[0-9]+', 'pon@[0-9a-f]+$' From schema: Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/spmi@200f000/pmic@1/audio-codec@f000: failed to match any schema with compatible: ['qcom,pm8916-wcd-analog-codec'] yaml documentation error not yet in -next arm64/boot/dts/qcom/apq8039-t2.dtb: remoteproc@4080000: qcom,halt-regs:0: [33] is too short From schema: Documentation/devicetree/bindings/remoteproc/qcom,msm8916-mss-pil.yaml Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/usb@78d9000: failed to match any schema with compatible: ['qcom,ci-hdrc'] Documentation/devicetree/bindings/arm/msm/qcom,kpss-acc.txt: compatible = "qcom,kpss-acc-v2"; arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/clock-controller@b088000: failed to match any schema with compatible: ['qcom,kpss-acc-v2'] arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/clock-controller@b098000: failed to match any schema with compatible: ['qcom,kpss-acc-v2'] arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/clock-controller@b0a8000: failed to match any schema with compatible: ['qcom,kpss-acc-v2'] arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/clock-controller@b0b8000: failed to match any schema with compatible: ['qcom,kpss-acc-v2'] arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/clock-controller@b188000: failed to match any schema with compatible: ['qcom,kpss-acc-v2'] arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/clock-controller@b198000: failed to match any schema with compatible: ['qcom,kpss-acc-v2'] arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/clock-controller@b1a8000: failed to match any schema with compatible: ['qcom,kpss-acc-v2'] arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/clock-controller@b1b8000: failed to match any schema with compatible: ['qcom,kpss-acc-v2'] V1: This series adds in MSM8939 SoC support with two supported devices. - CPU MSM8939 is a non-PSCI compliant device. As such in the downstreaming shipped image custom code is used to bring non-boot cores out of reset. This drop specifies the boot-method as spin-table instead and is completely standard. To accomplish this, we rely on lk2nd. https://github.com/msm8916-mainline/lk2nd/pull/142 - Serial - i2c - USB - eMMC - MDP/DSI - WiFi - Bluetooth What's not included - CPR We have CPR working in a 4.19 kernel quite well but for now it feels like putting the cart before the horse to gate the SoC and boards on CPR. - Venus I've been told this works but I haven't tried it myself and right now consider it maybe working but probably not 100%. - Sound We have a copy-exactly from the 4.19 kernel here in the DTS. I haven't run the sound through any sort of reasonable test. Vincent Knecht has some PostmarketOS kernels which use a 5.17 version of this DTS to get sound up so, I think sound is in good shape. - CAMSS There are slight differences between msm8916 and msm8939 for CAMSS. It doesn't feel like tons of work but, right now it is work we haven't even started. - Devices I've booted on the Square device obviously and this is my regular hardware for upstream development. I've also booted on the Sony Xperia M4 Aqua including mutli-core bring-up, WiFi and ADB. Dependencies for this drop: qcom-cpufreq-nvmem: Add msm8939 with some fixups link: https://lore.kernel.org/linux-arm-msm/20220418162226.2983117-1-bryan.odonoghue@xxxxxxxxxx/T/#t Fix apq8016 compat string link: https://lore.kernel.org/linux-arm-msm/20220418230956.3059563-1-bryan.odonoghue@xxxxxxxxxx/T/#t dt-bindings: soc: qcom: smd-rpm: Fix missing MSM8936 compatible link: https://lore.kernel.org/linux-arm-msm/20220418231857.3061053-1-bryan.odonoghue@xxxxxxxxxx/T/#u Bootable tree here: https://git.linaro.org/people/bryan.odonoghue/kernel.git/log/?h=v5.18-rc2%2bapq8039-without-cpr Bryan O'Donoghue (6): dt-bindings: interconnect: Move interconnect child node definition dt-bindings: arm: qcom: Document MSM8939 SoC binding dt-bindings: soc: qcom: smd-rpm: Exclude MSM8936 from glink-channels arm64: dts: qcom: Add msm8939 SoC arm64: dts: qcom: Add Square apq8039-t2 board arm64: dts: qcom: Add msm8939 Sony Xperia M4 Aqua Stephan Gerhold (1): arm64: dts: qcom: Add msm8939-pm8916.dtsi include .../devicetree/bindings/arm/qcom.yaml | 8 + .../bindings/interconnect/qcom,rpm.yaml | 62 +- .../bindings/soc/qcom/qcom,smd-rpm.yaml | 1 + arch/arm64/boot/dts/qcom/Makefile | 2 + arch/arm64/boot/dts/qcom/apq8039-t2.dts | 557 ++++ arch/arm64/boot/dts/qcom/msm8939-pm8916.dtsi | 82 + .../qcom/msm8939-sony-xperia-kanuti-tulip.dts | 472 ++++ arch/arm64/boot/dts/qcom/msm8939.dtsi | 2470 +++++++++++++++++ 8 files changed, 3623 insertions(+), 31 deletions(-) create mode 100644 arch/arm64/boot/dts/qcom/apq8039-t2.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8939-pm8916.dtsi create mode 100644 arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8939.dtsi -- 2.34.1
