Re: [PATCH 1/6] arm64: dts: qcom: sc8280xp-x13s: disable soundcard

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 02/01/2023 11:50, Johan Hovold wrote:
> Driver support for the X13s soundcard is not yet in place so disable it
> for now to avoid probe failures such as:
> 
> [   11.077727] qcom-prm gprsvc:service:2:2: DSP returned error[100100f] 1
> [   11.077926] rx_macro: probe of 3200000.rxmacro failed with error -22
> [   21.221104] platform 3210000.soundwire-controller: deferred probe pending
> 
> Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
> ---
>  .../boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts  | 12 ++++++++++--
>  1 file changed, 10 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> index 0201c6776746..97ff74d5095e 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> @@ -649,6 +649,8 @@ wcd938x: codec {
>  		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
>  		qcom,rx-device = <&wcd_rx>;
>  		qcom,tx-device = <&wcd_tx>;
> +
> +		status = "disabled";
>  	};
>  };
>  
> @@ -669,6 +671,8 @@ &sound {
>  		"TX DMIC2", "MIC BIAS3",
>  		"TX SWR_ADC1", "ADC2_OUTPUT";
>  
> +	status = "disabled";
> +
>  	wcd-playback-dai-link {
>  		link-name = "WCD Playback";
>  		cpu {
> @@ -731,6 +735,8 @@ codec {
>  };
>  
>  &swr0 {
> +	status = "disabled";
> +
>  	left_spkr: wsa8830-left@0,1 {
>  		compatible = "sdw10217020200";
>  		reg = <0 1>;
> @@ -757,7 +763,7 @@ right_spkr: wsa8830-right@0,2{
>  };
>  
>  &swr1 {
> -	status = "okay";
> +	status = "disabled";
>  
>  	wcd_rx: wcd9380-rx@0,4 {
>  		compatible = "sdw20217010d00";
> @@ -767,7 +773,7 @@ wcd_rx: wcd9380-rx@0,4 {
>  };
>  
>  &swr2 {
> -	status = "okay";
> +	status = "disabled";

That's a double disable.

>  
>  	wcd_tx: wcd9380-tx@0,3 {
>  		compatible = "sdw20217010d00";
> @@ -781,6 +787,8 @@ &vamacro {
>  	pinctrl-names = "default";
>  	vdd-micb-supply = <&vreg_s10b>;
>  	qcom,dmic-sample-rate = <600000>;
> +
> +	status = "disabled";

That's a double disable.

Best regards,
Krzysztof




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux