Re: [PATCH 4/6] arm64: dts: qcom: sc8280xp-x13s: fix wcd938x codec node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 2.01.2023 11:50, Johan Hovold wrote:
> The wcd938x codec is not a memory-mapped device and does not belong
> under the soc node.
> 
> Move the node to the root node to avoid DT validation failures.
> 
> While at it, clean up the node somewhat by adding newline separators,
> reordering properties and renaming it 'audio-codec'.
> 
> Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>

Konrad
>  .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts    | 54 ++++++++++---------
>  1 file changed, 28 insertions(+), 26 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> index 97ff74d5095e..ae67c11bfc22 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> @@ -21,6 +21,34 @@ / {
>  	model = "Lenovo ThinkPad X13s";
>  	compatible = "lenovo,thinkpad-x13s", "qcom,sc8280xp";
>  
> +	wcd938x: audio-codec {
> +		compatible = "qcom,wcd9380-codec";
> +
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&wcd_default>;
> +
> +		reset-gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
> +
> +		vdd-buck-supply = <&vreg_s10b>;
> +		vdd-rxtx-supply = <&vreg_s10b>;
> +		vdd-io-supply = <&vreg_s10b>;
> +		vdd-mic-bias-supply = <&vreg_bob>;
> +
> +		qcom,micbias1-microvolt = <1800000>;
> +		qcom,micbias2-microvolt = <1800000>;
> +		qcom,micbias3-microvolt = <1800000>;
> +		qcom,micbias4-microvolt = <1800000>;
> +		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
> +		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
> +		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
> +		qcom,rx-device = <&wcd_rx>;
> +		qcom,tx-device = <&wcd_tx>;
> +
> +		#sound-dai-cells = <1>;
> +
> +		status = "disabled";
> +	};
> +
>  	backlight {
>  		compatible = "pwm-backlight";
>  		pwms = <&pmc8280c_lpg 3 1000000>;
> @@ -628,32 +656,6 @@ &remoteproc_nsp0 {
>  	status = "okay";
>  };
>  
> -&soc {
> -	wcd938x: codec {
> -		compatible = "qcom,wcd9380-codec";
> -		pinctrl-names = "default";
> -		pinctrl-0 = <&wcd_default>;
> -		reset-gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
> -		#sound-dai-cells = <1>;
> -
> -		vdd-buck-supply = <&vreg_s10b>;
> -		vdd-rxtx-supply = <&vreg_s10b>;
> -		vdd-io-supply = <&vreg_s10b>;
> -		vdd-mic-bias-supply = <&vreg_bob>;
> -		qcom,micbias1-microvolt = <1800000>;
> -		qcom,micbias2-microvolt = <1800000>;
> -		qcom,micbias3-microvolt = <1800000>;
> -		qcom,micbias4-microvolt = <1800000>;
> -		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
> -		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
> -		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
> -		qcom,rx-device = <&wcd_rx>;
> -		qcom,tx-device = <&wcd_tx>;
> -
> -		status = "disabled";
> -	};
> -};
> -
>  &sound {
>  	compatible = "qcom,sc8280xp-sndcard";
>  	model = "SC8280XP-LENOVO-X13S";



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux